EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Correlation between Electronic Structure, Microstructure, and Switching Mode in Valence Change Mechanism Al 2 O 3 /TiO x ‐Based Memristive Devices

Stephan Aussen, Felix Cüppers, Carsten Funck, Janghyun Jo, Stephan Werner, Christoph Pratsch, Stephan Menzel, Regina Dittmann, Rafal Dunin‐Borkowski, Rainer Waser, Susanne Hoffmann‐Eifert

Advanced Electronic Materials · 2023-12 · 9 (12)

DOI: 10.1002/aelm.202300520 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Electronic Materials, online erschienen am 05.10.2023. Verfasst von Stephan Aussen und 10 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 83 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Bildung und Forschung, Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Memristive devices with valence change mechanism (VCM) show promise for neuromorphic data processing, although emulation of synaptic behavior with analog weight updates remains a challenge. Standard filamentary and area‐dependent resistive switching exhibit characteristic differences in the transition from the high to low resistance state, which is either abrupt with inherently high variability or gradual and allows quasi‐analog operation. In this study, the two switching modes are clearly correlated to differences in the microstructure and electronic structure for Pt/Al 2 O 3 /TiO x /Cr/Pt devices made from amorphous layers of 1.2 nm Al 2 O 3 and 7 nm TiO x by atomic layer deposition. For the filamentary mode, operando spectromicroscopy experiments identify a localized region of ≈50 nm in diameter of reduced titania surrounded by crystalline rutile‐like TiO 2 , highlighting the importance of Joule heating for this mode. In contrast, both oxide layers remain in their amorphous state for the interfacial mode, which proves that device temperature during switching stays below 670 K, which is the TiO 2 crystallization temperature. The analysis of the electronic conduction behavior confirms that the interfacial switching occurs by modulating the effective tunnel barrier width due to accumulation and depletion of oxygen vacancies at the Al 2 O 3 /TiO x interface. The results are transferable to other bilayer stacks.

Förderung

  • Bundesministerium für Bildung und Forschung
  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Aussen, S., Cüppers, F., Funck, C., Jo, J., Werner, S., Pratsch, C., Menzel, S., Dittmann, R., Dunin‐Borkowski, R., Waser, R., & Hoffmann‐Eifert, S. (2023). Correlation between Electronic Structure, Microstructure, and Switching Mode in Valence Change Mechanism Al 2 O 3 /TiO x ‐Based Memristive Devices. Advanced Electronic Materials, 9(12). https://doi.org/10.1002/aelm.202300520

Vancouver

Aussen S, Cüppers F, Funck C, Jo J, Werner S, Pratsch C, et al. Correlation between Electronic Structure, Microstructure, and Switching Mode in Valence Change Mechanism Al 2 O 3 /TiO x ‐Based Memristive Devices. Advanced Electronic Materials. 2023;9(12). doi:10.1002/aelm.202300520

BibTeX
@article{Aussen2023,
  author = {Aussen, Stephan and Cüppers, Felix and Funck, Carsten and Jo, Janghyun and Werner, Stephan and Pratsch, Christoph and Menzel, Stephan and Dittmann, Regina and Dunin‐Borkowski, Rafal and Waser, Rainer and Hoffmann‐Eifert, Susanne},
  title = {Correlation between Electronic Structure, Microstructure, and Switching Mode in Valence Change Mechanism Al 2 O 3 /TiO x ‐Based Memristive Devices},
  journal = {Advanced Electronic Materials},
  year = {2023},
  volume = {9},
  number = {12},
  doi = {10.1002/aelm.202300520}
}
Kostenlos starten →