Ultrathin, Breathable, Permeable, and Skin‐Adhesive Charge Storage Electronic Tattoos Based on Biopolymer Nanofibers and Carbon Nanotubes
Advanced Electronic Materials · 2023-09 · 9 (9)
DOI: 10.1002/aelm.202201095 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Electronic Materials, online erschienen am 20.12.2022. Verfasst von Shalik Ram Joshi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Rural Development Administration.
Abstract (Originalsprache)
Ultrathin, breathable, and skin‐compatible epidermal electronics are attractive for wearable and implantable healthcare and biomedical applications. However, materializing and integrating all electronic components on ultrathin platforms is still challenging. Here, a charge‐storing electronic tattoo (E‐tattoo) device with ultrathin, breathable, and skin‐compatible properties is reported. Silk protein nanofibers (SNFs) and carbon nanotubes (CNTs) form the top and bottom electrodes that sandwich the intermediate dielectric layer fabricated using poly(vinyl alcohol) nanofibers. The E‐tattoo capacitors on the deformed skin, show excellent mechanical and electrical stability, and 60 µm‐thick capacitors exhibit frequency‐dependent capacitances (up to 350 pF at 5 kHz) and capability for memory operation. Mechanical bending induces capacitance change, which increases as the bending radius is decreased, indicating mechanical sensing capability of the E‐tattoo. SNF/CNT‐based triboelectric nanogenerator E‐tattoos can be connected to the capacitor E‐tattoo, and the charges generated by multiple bare‐finger touches can be stored in the capacitor (0.23 V for 200 touches). Due to the micro/nanopores in the NF networks, the device exhibits a water vapor transmission rate of 115.04 g m −2 d −1 , which is better than that of a commercial band‐aid, as well as ethanol sensing capability. Developed E‐tattoo capacitor can be used for constructing multicomponent integrated ultrathin and epidermal electronics.
Förderung
- Rural Development Administration
Zitieren
APA
Joshi, S. R., Pratap, A., Gogurla, N., & Kim, S. (2023). Ultrathin, Breathable, Permeable, and Skin‐Adhesive Charge Storage Electronic Tattoos Based on Biopolymer Nanofibers and Carbon Nanotubes. Advanced Electronic Materials, 9(9). https://doi.org/10.1002/aelm.202201095
Vancouver
Joshi SR, Pratap A, Gogurla N, Kim S. Ultrathin, Breathable, Permeable, and Skin‐Adhesive Charge Storage Electronic Tattoos Based on Biopolymer Nanofibers and Carbon Nanotubes. Advanced Electronic Materials. 2023;9(9). doi:10.1002/aelm.202201095
BibTeX
@article{Joshi2023,
author = {Joshi, Shalik Ram and Pratap, Ajay and Gogurla, Narendar and Kim, Sunghwan},
title = {Ultrathin, Breathable, Permeable, and Skin‐Adhesive Charge Storage Electronic Tattoos Based on Biopolymer Nanofibers and Carbon Nanotubes},
journal = {Advanced Electronic Materials},
year = {2023},
volume = {9},
number = {9},
doi = {10.1002/aelm.202201095}
}
EUVIMED