EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Oxygen Vacancies Engineering in Thick Semiconductor Films via Deep Ultraviolet Photoactivation for Selective and Sensitive Gas Sensing

Zain Ul Abideen, Jun‐Gyu Choi, Jodie A. Yuwono, Alexander Kiy, Priyank Vijaya Kumar, Krishnan Murugappan, Won‐June Lee, Patrick Kluth, David R. Nisbet, Thanh Tran‐Phu, Myung‐Han Yoon, Antonio Tricoli

Advanced Electronic Materials · 2023-04 · 9 (4)

DOI: 10.1002/aelm.202200905 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Electronic Materials, online erschienen am 20.02.2023. Verfasst von Zain Ul Abideen und 11 weiteren Autor:innen. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 86 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: North Atlantic Treaty Organization, Australian Renewable Energy Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Room‐temperature detection of volatile organic compounds in particle‐per‐billion concentrations is critical for the development of wearable and distributed sensor networks. However, sensitivity and selectivity are limited at low operating temperatures. Here, a strategy is proposed to substantially improve the performance of semiconductor sensors. Tunable oxygen vacancies in thick 3D networks of metal oxide nanoparticles are engineered using deep ultraviolet photoactivation. High selectivity and sensitivity are achieved by optimizing the electronic structure and surface activity while preserving the 3D morphology. Cross‐sectional depth analysis reveals oxygen vacancies present at various depths (≈24% at a depth of 1.13 µm), with a uniform distribution throughout the thick films. This results in ≈58% increase in the sensitivity of ZnO to 20‐ppb ethanol at room temperature while ≈51% and 64% decrease in the response and recovery times, respectively. At an operating temperature of 150 °C, oxygen‐vacant nanostructures achieve a lower limit of detection of 2 ppb. Density functional theory analysis shows that inducing oxygen vacancies reduces activation energy for ethanol adsorption and dissociation, leading to improved sensing performance. This scalable approach has the potential for designing low‐power wearable chemical and bio‐sensors and tuning the activity and band structure of porous, thick oxide films for multiple applications.

Förderung

  • North Atlantic Treaty Organization
  • Australian Renewable Energy Agency

Zitieren

APA

Abideen, Z. U., Choi, J., Yuwono, J. A., Kiy, A., Kumar, P. V., Murugappan, K., Lee, W., Kluth, P., Nisbet, D. R., Tran‐Phu, T., Yoon, M., & Tricoli, A. (2023). Oxygen Vacancies Engineering in Thick Semiconductor Films via Deep Ultraviolet Photoactivation for Selective and Sensitive Gas Sensing. Advanced Electronic Materials, 9(4). https://doi.org/10.1002/aelm.202200905

Vancouver

Abideen ZU, Choi J, Yuwono JA, Kiy A, Kumar PV, Murugappan K, et al. Oxygen Vacancies Engineering in Thick Semiconductor Films via Deep Ultraviolet Photoactivation for Selective and Sensitive Gas Sensing. Advanced Electronic Materials. 2023;9(4). doi:10.1002/aelm.202200905

BibTeX
@article{Abideen2023,
  author = {Abideen, Zain Ul and Choi, Jun‐Gyu and Yuwono, Jodie A. and Kiy, Alexander and Kumar, Priyank Vijaya and Murugappan, Krishnan and Lee, Won‐June and Kluth, Patrick and Nisbet, David R. and Tran‐Phu, Thanh and Yoon, Myung‐Han and Tricoli, Antonio},
  title = {Oxygen Vacancies Engineering in Thick Semiconductor Films via Deep Ultraviolet Photoactivation for Selective and Sensitive Gas Sensing},
  journal = {Advanced Electronic Materials},
  year = {2023},
  volume = {9},
  number = {4},
  doi = {10.1002/aelm.202200905}
}
Kostenlos starten →