Clean Thermolysis PMMA Top Layer Enables High‐Efficiency Kesterite Solar Cells
Advanced Science · 18.11.2026
DOI: 10.1002/advs.78864 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 18.11.2026. Verfasst von Rilige Su und 12 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Regulating the phase evolution during selenization of kesterite (Ag,Cu) 2 ZnSn(S,Se) 4 (ACZTSSe) absorbers is essential for high‐efficiency solar cells, yet it remains challenging because of uncontrolled contact reactions between the precursor film and selenium vapor. Herein, we introduce a poly (methyl methacrylate) (PMMA) blocking layer with clean‐thermolysis characteristics onto the ACZTSSe precursor top surface to precisely control the onset of selenization. At low temperatures, the PMMA layer acts as a physical barrier that isolates the precursor from Se vapor, effectively suppressing premature reactions and secondary phase formation. Upon heating above 400°C, the PMMA decomposes almost residue‐free, immediately exposing the precursor to high‐concentration Se vapor and triggering a rapid one‐step conversion into the desired kesterite phase. This temperature‐triggered decomposition decouples early‐stage intermediate reactions from final phase formation, significantly reducing secondary phases and the density of detrimental [2Cu Zn +Sn Zn ] defect clusters. Variable‐wavelength photoluminescence confirms the simultaneous suppression of non‐radiative recombination in both the bulk and the interfaces, yielding a prolonged minority carrier lifetime. The optimized device achieves a power conversion efficiency of 14.69% with an open‐circuit voltage of 566 mV. This work demonstrates a simple yet effective interfacial engineering strategy for steering selenization pathways, offering a practical route toward higher‐quality kesterite absorbers.
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Su, R., Wang, L., Wang, Y., Li, H., Guo, R., Lu, X., Niu, X., Xia, N., Wang, G., Wang, Y., Wang, C., Chen, S., & Zhang, X. (2026). Clean Thermolysis PMMA Top Layer Enables High‐Efficiency Kesterite Solar Cells. Advanced Science. https://doi.org/10.1002/advs.78864
Vancouver
Su R, Wang L, Wang Y, Li H, Guo R, Lu X, et al. Clean Thermolysis PMMA Top Layer Enables High‐Efficiency Kesterite Solar Cells. Advanced Science. 2026. doi:10.1002/advs.78864
BibTeX
@article{Su2026,
author = {Su, Rilige and Wang, Lingling and Wang, Yawei and Li, Hao and Guo, Rui and Lu, Xingyu and Niu, Xinghang and Xia, Ning and Wang, Guorui and Wang, Yinglin and Wang, Changhua and Chen, Shijian and Zhang, Xintong},
title = {Clean Thermolysis PMMA Top Layer Enables High‐Efficiency Kesterite Solar Cells},
journal = {Advanced Science},
year = {2026},
doi = {10.1002/advs.78864}
}
EUVIMED