Decoding Electro‐Chemo‐Mechanical Coupled Failure in Silicon Monoxide‐Based Anodes via Operando Pressure Monitoring for All‐Solid‐State Batteries
Advanced Science · 15.11.2026
DOI: 10.1002/advs.78812 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 15.11.2026. Verfasst von Jiyu Lee und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan, Republic of Korea. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2026 Research Fund, UNIST, National Research Foundation of Korea.
Abstract (Originalsprache)
All‐solid‐state batteries (ASSBs) require high‐energy‐density anodes that operate under practical low stack pressures. Although silicon‐based anodes are promising, most studies rely on stack pressures exceeding 50 MPa. Here, operando pressiometry reveals that areal‐capacity‐normalized stress serves as a comparative indicator of reaction uniformity in silicon monoxide (SiO)‐based anodes. While incorporating solid electrolyte (SE) and conductive carbon improves percolation pathways, SE content paradoxically promotes severe side reactions or lithium plating. Based on insights into the electro‐chemo‐mechanical behavior of SiO‐based anodes, a mixed ionic‐electronic conductor (MIEC) composite architecture combining low‐volume‐expansion SiO with a prelithiated Li 21 Si 5 phase (SiO/PreLiSi) is introduced. The SiO/PreLiSi anode provides continuous ionic and electronic pathways, reduces irreversible capacity loss, and enhances interfacial contact through plastic deformation, enabling uniform lithiation under low stack pressure without external SE and carbon additives. Compared to Si/PreLiSi counterparts, the SiO/PreLiSi composite forms stable buffering phases that mitigate volume changes and suppress stress accumulation. Consequently, the SiO/PreLiSi anode demonstrates reduced pressure variation, improved capacity retention, and prolonged cycling stability under low stack pressure. This work provides a fundamental design principle for next‐generation ASSB anodes capable of practical low‐pressure operation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan, Republic of Korea.
- Department of Chemical and Biomolecular Engineering, University of California, Los Angeles (UCLA), Los Angeles, California, USA.
ORCID-Profile: Seungwoo Ryu, Seungwoo Choi, Min-Ho Kim, Hyun-Wook Lee
Förderung
- 2026 Research Fund
- UNIST
- National Research Foundation of Korea
- Ulsan National Institute of Science and Technology
Zitieren
APA
Lee, J., Jung, S. J., Ryu, S., Kang, M. G., Choi, S., Min, Y. U., Kim, M. H., & Lee, H. W. (2026). Decoding Electro‐Chemo‐Mechanical Coupled Failure in Silicon Monoxide‐Based Anodes via Operando Pressure Monitoring for All‐Solid‐State Batteries. Advanced Science. https://doi.org/10.1002/advs.78812
Vancouver
Lee J, Jung SJ, Ryu S, Kang MG, Choi S, Min YU, et al. Decoding Electro‐Chemo‐Mechanical Coupled Failure in Silicon Monoxide‐Based Anodes via Operando Pressure Monitoring for All‐Solid‐State Batteries. Advanced Science. 2026. doi:10.1002/advs.78812
BibTeX
@article{Lee2026,
author = {Lee, Jiyu and Jung, Soon-Jae and Ryu, Seungwoo and Kang, Min-Goo and Choi, Seungwoo and Min, Yeong-Un and Kim, Min-Ho and Lee, Hyun-Wook},
title = {Decoding Electro‐Chemo‐Mechanical Coupled Failure in Silicon Monoxide‐Based Anodes via Operando Pressure Monitoring for All‐Solid‐State Batteries},
journal = {Advanced Science},
year = {2026},
doi = {10.1002/advs.78812}
}
EUVIMED