Gradient‐Integrated High‐Strength and High‐Toughness Cellulose Triboelectric Materials for Enhanced Charge Storage and Transport
Advanced Science · 10.11.2026
DOI: 10.1002/advs.78778 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 10.11.2026. Verfasst von Pinle Zhang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industry and Food Engineering, Guangxi University, Nanning,…. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangxi Natural Science Foundation of China, Foundation of State Key Laboratory of Biobased Material and Green Papermaking.
Abstract (Originalsprache)
The rapid advancement of wearable electronics places ever‐increasing demands on the electrical and mechanical properties of materials. Cellulose offers renewability, low cost, and high durability for green wearables, but its weak electron‐donating ability and poor charge‐transport efficiency limit triboelectric performance. Interfacial mismatch between the electrode and triboelectric layers also induces charge dissipation, further aggravating this problem. Inspired by the Janus structure found in sea urchin spines, a gradient‐integrated triboelectric material (MWCNT/T‐CNFs) was fabricated via vacuum‐assisted layer‐by‐layer filtration. The resulting gradient electric field forms a highly compatible interface between the triboelectric layer and the electrode layer, providing a low‐impedance path that effectively suppresses charge dissipation. Consequently, the material achieves a surface charge density of 20.5 nC cm −2 (931.8% that of pure T‐CNFs) and excellent cycling stability (8044 cycles). The integrated interface offers strong adhesion, far outperforming conventional electrode tapes, while the gradient design alleviates stress concentration, yielding a tensile strength of 126.33 MPa and toughness of 9.11 MJ m −3 (535.9% that of pure T‐CNFs). The material also exhibits good water stability and high‐temperature resistance. This study addresses the key limitations of low surface charge density and interfacial mismatch in cellulose materials, providing a solid foundation for interface design in wearable electronics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industry and Food Engineering, Guangxi University, Nanning, China.
ORCID-Profile: Shuangfei Wang, Xinliang Liu
Förderung
- National Natural Science Foundation of China
- Guangxi Natural Science Foundation of China
- Foundation of State Key Laboratory of Biobased Material and Green Papermaking
- Innovation Project of Guangxi Graduate Education
Zitieren
APA
Zhang, P., Xu, Y., Huang, H., Xiong, N., Yu, X., Nong, X., He, Y., Li, R., Wang, S., & Liu, X. (2026). Gradient‐Integrated High‐Strength and High‐Toughness Cellulose Triboelectric Materials for Enhanced Charge Storage and Transport. Advanced Science. https://doi.org/10.1002/advs.78778
Vancouver
Zhang P, Xu Y, Huang H, Xiong N, Yu X, Nong X, et al. Gradient‐Integrated High‐Strength and High‐Toughness Cellulose Triboelectric Materials for Enhanced Charge Storage and Transport. Advanced Science. 2026. doi:10.1002/advs.78778
BibTeX
@article{Zhang2026,
author = {Zhang, Pinle and Xu, Yanhao and Huang, Huancheng and Xiong, Neng and Yu, Xinke and Nong, Xinyue and He, Yingping and Li, Ruizhi and Wang, Shuangfei and Liu, Xinliang},
title = {Gradient‐Integrated High‐Strength and High‐Toughness Cellulose Triboelectric Materials for Enhanced Charge Storage and Transport},
journal = {Advanced Science},
year = {2026},
doi = {10.1002/advs.78778}
}
EUVIMED