EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stretchable Electronic Skins Realized by Confined In Situ Silver Patterning on Siloxane‐Modified Polyimide

Jialun Yin, Yongjun Kang, Fangzhou Liu, Yifei Tong, Guofeng Tian iD, Shengli Qi iD, Dezhen Wu

Advanced Science · 09.11.2026

DOI: 10.1002/advs.78699 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 09.11.2026. Verfasst von Jialun Yin und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing, China. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rapid development of soft robotics and embodied intelligence demands electronic skins (E‐skins) that are both mechanically self‐adaptive and skin‐conformal. However, the rigid aromatic backbones of conventional polyimides limit stretchability and hinder conformal integration with deformable surfaces. Here, elastically stretchable polyimide (es‐PI) films are developed by incorporating aminopropyl‐terminated siloxane spacers, while a confined‐patterned in situ self‐metallization strategy enables direct fabrication of patterned silver circuits. By spatially confining Ag + coordination and reduction within predefined regions, this strategy produces continuous silver nanolayers with well‐defined boundaries and robust metal–polymer interfaces, preserving electrical integrity during repeated deformation. The selected es‐PI‐0.5 substrate exhibits an estimated nominal elongation at break of approximately 96% and a tensile strength of approximately 25 MPa, while the corresponding metallized film retains electrical continuity during tensile deformation up to 50% strain. Device‐level feasibility is demonstrated through a strain‐dependent inductor–capacitor (LC) resonance response measured using a network analyzer and a separate smartphone‐assisted near‐field excitation experiment with rectified direct‐current (DC) output detected using a multimeter. This work establishes a materials–circuit integration approach for stretchable electronic skins and skin‐mounted sensing demonstrations.

Schlagwörter

Stichwörter der Autor:innen

LC resonatorconfined metallizationelectronic skinin‐situin situ silver patterningskin‐conformal electronicsstretchable polyimide

Autor:innen und Institutionen

  • State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing, China.
  • Changzhou Institute of Advanced Materials, Beijing University of Chemical Technology, Changzhou, Jiangsu, China.

ORCID-Profile: Guofeng Tian, Shengli Qi

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Yin, J., Kang, Y., Liu, F., Tong, Y., Tian, G., Qi, S., & Wu, D. (2026). Stretchable Electronic Skins Realized by Confined In Situ Silver Patterning on Siloxane‐Modified Polyimide. Advanced Science. https://doi.org/10.1002/advs.78699

Vancouver

Yin J, Kang Y, Liu F, Tong Y, Tian G, Qi S, et al. Stretchable Electronic Skins Realized by Confined In Situ Silver Patterning on Siloxane‐Modified Polyimide. Advanced Science. 2026. doi:10.1002/advs.78699

BibTeX
@article{Yin2026,
  author = {Yin, Jialun and Kang, Yongjun and Liu, Fangzhou and Tong, Yifei and Tian, Guofeng and Qi, Shengli and Wu, Dezhen},
  title = {Stretchable Electronic Skins Realized by Confined In Situ Silver Patterning on Siloxane‐Modified Polyimide},
  journal = {Advanced Science},
  year = {2026},
  doi = {10.1002/advs.78699}
}
Kostenlos starten →