Zr Incorporation Into Lithium Nickel Oxides: Bulk or Surface Substitution?
Advanced Science · 04.11.2026
DOI: 10.1002/advs.78453 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 04.11.2026. Verfasst von Lars Winkler und 10 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Energy Materials and Devices (IMD) - IMD-2: Materials Synthesis and Processing, Forschungszentrum Jülich GmbH, Jülich, Germany. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Federal Ministry of Research, Technology and Space, National Science and Technology Council.
Abstract (Originalsprache)
High‐capacity lithium nickel oxides (LNO) are promising cathode active materials for next‐generation batteries. However, their practical application is limited by poor cycling stability. Doping the LNO cathode with high‐valence elements is an effective strategy to enhance structural stability. In this study, we investigate the mechanism of Zr 4+ incorporation into LNO using experimental and theoretical techniques. Our findings reveal that under oxygen‐rich conditions, Zr‐doped LNO can be realized as a single phase, but most Zr cations localize at the surface of primary particles. In contrast, under oxygen‐deficient or non‐equilibrium conditions a secondary layered Li 1‐x Ni 1+x O 2 phase, characterized by Ni migration into the Li layers (cation ordering), is stabilized coexisting with Zr‐doped LNO. This promotes elongation of primary particles at the aggregation surface. The Zr enrichment at the microparticle surface, Zr‐induced cation‐ordered superstructure, and the formation of elongated grains enhance the chemical stability as well as the structural integrity at atomistic‐ and micro‐scale of the LNO cathode, improving its cycling performance. However, only 1–3% Zr is necessary to maintain the initial capacity and enhance cyclability through surface coating and low bulk doping with Zr. With increasing Zr concentration, an electronically insulating impurity (Li 2 ZrO 3 ) forms, leading to a decrease in the initial capacity.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Energy Materials and Devices (IMD) - IMD-2: Materials Synthesis and Processing, Forschungszentrum Jülich GmbH, Jülich, Germany.
- MESA+ Institute for Nanotechnology, University of Twente, Enschede, The Netherlands.
- Department of Energy Engineering, Hanyang University, Seoul, South Korea.
- Chair For Theoretical Physics VII and Bavarian Center For Battery Technologies, University of Bayreuth, Bayreuth, Germany.
- Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei City, Taiwan.
ORCID-Profile: Lars Winkler, Geon-Tae Park, Liang-Yin Kuo, Martin Ihrig, Konstantin Köster, Johan E Ten Elshof, Mark Huijben, Yang-Kook Sun, Payam Kaghazchi
Förderung
- German Federal Ministry of Research, Technology and Space
- National Science and Technology Council
Zitieren
APA
Winkler, L., Park, G. T., Kuo, L. Y., Ihrig, M., Köster, K., Ten Elshof, J. E., Huijben, M., Kim, M. C., Seo, M. G., Sun, Y. K., & Kaghazchi, P. (2026). Zr Incorporation Into Lithium Nickel Oxides: Bulk or Surface Substitution?. Advanced Science. https://doi.org/10.1002/advs.78453
Vancouver
Winkler L, Park GT, Kuo LY, Ihrig M, Köster K, Ten Elshof JE, et al. Zr Incorporation Into Lithium Nickel Oxides: Bulk or Surface Substitution?. Advanced Science. 2026. doi:10.1002/advs.78453
BibTeX
@article{Winkler2026,
author = {Winkler, Lars and Park, Geon-Tae and Kuo, Liang-Yin and Ihrig, Martin and Köster, Konstantin and Ten Elshof, Johan E and Huijben, Mark and Kim, Myoung-Chan and Seo, Min-Gyu and Sun, Yang-Kook and Kaghazchi, Payam},
title = {Zr Incorporation Into Lithium Nickel Oxides: Bulk or Surface Substitution?},
journal = {Advanced Science},
year = {2026},
doi = {10.1002/advs.78453}
}
EUVIMED