EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design Rules for Quantitative Control of Intragrain Planar Defects in Halide Perovskites

Byeongjun Gil iD, So Jeong Park iD, Jin Young Kim iD, Miyoung Kim iD

Advanced Science · 2026-11 · 13 (63)

DOI: 10.1002/advs.77365 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 24.08.2026. Verfasst von Byeongjun Gil und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Seoul National University, Seoul, Republic of Korea. Die Arbeit nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea government (MSIT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Intragrain planar defects limit carrier transport and operational stability in halide perovskite photovoltaics, yet quantitative rules to control their formation are still lacking. Here defect‐specific design rules are established for two dominant planar defects—{112} t ferroelastic twins and {111} c twins/stacking faults—in MA 1‐x Gua x PbI 3 thin films (MA = methylammonium, Gua = guanidinium) by rigorously dose‐budgeted low‐dose transmission electron microscopy. Independent variation of A‐site composition and annealing conditions decouples the roles of tetragonality ( t ; pseudo‐cubic c / a ), grain size, and crystallization kinetics. {112} t twin density increases with tetragonality and grain size but is insensitive to crystallization kinetics, whereas {111} c defects emerge at reduced tetragonality and remain grain‐size independent. These correlations define a processing window ( t ≈ 1.005–1.010 for submicron grains) that simultaneously suppresses both defect types. Solar cells fabricated within this window exhibit longer carrier lifetimes and higher power‐conversion efficiencies, supporting the importance of intragrain planar‐defect control.

Schlagwörter

Stichwörter der Autor:innen

defect engineeringhalide perovskitesintragrain planar defectslow‐dose transmission electron microscopyperovskite solar cells

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Seoul National University, Seoul, Republic of Korea.
  • Research Institute of Advanced Materials (RIAM), Seoul National University, Seoul, Republic of Korea.
  • School of Transdisciplinary Innovations, Seoul National University, Seoul, Republic of Korea.

ORCID-Profile: Byeongjun Gil, So Jeong Park, Jin Young Kim, Miyoung Kim

Förderung

  • National Research Foundation of Korea
  • Korea government (MSIT)

Zitieren

APA

Gil, B., Park, S. J., Kim, J. Y., & Kim, M. (2026). Design Rules for Quantitative Control of Intragrain Planar Defects in Halide Perovskites. Advanced Science, 13(63). https://doi.org/10.1002/advs.77365

Vancouver

Gil B, Park SJ, Kim JY, Kim M. Design Rules for Quantitative Control of Intragrain Planar Defects in Halide Perovskites. Advanced Science. 2026;13(63). doi:10.1002/advs.77365

BibTeX
@article{Gil2026,
  author = {Gil, Byeongjun and Park, So Jeong and Kim, Jin Young and Kim, Miyoung},
  title = {Design Rules for Quantitative Control of Intragrain Planar Defects in Halide Perovskites},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {63},
  doi = {10.1002/advs.77365}
}
Kostenlos starten →