EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bidirectional Soft Catalysts for Improved Power Performance of Li‐S Batteries

Maleesha M Nishshanke iD, Petar Jovanovic iD, Swarit Dwivedi, Declan McNamara, Akshat Tanksale iD, Mahdokht Shaibani, Matthew Hill iD, Mainak Majumder iD

Advanced Science · 2026-11 · 13 (62)

DOI: 10.1002/advs.77302 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 21.08.2026. Verfasst von Maleesha M Nishshanke und 7 weiteren Autor:innen. Beteiligte Einrichtung: Nanoscale Science and Engineering Laboratory (NSEL), Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, VIC, Australia. Die Arbeit nennt 107 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Air Force Office of Scientific Research, Australian Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium‐sulfur (Li‐S) batteries are attractive for next‐generation energy storage owing to their high theoretical energy density and low cost, yet their practical performance is limited by sluggish redox kinetics. Here, we introduce a soft catalyst in which a polymer‐metal complex is directly integrated into the binder, creating a catalytically active microenvironment that enables efficient and bidirectional sulfur catalysis. A polyvinyl alcohol (PVA) scaffold stabilizes metal ions through chelation with the electron‐donating ‐OH groups of PVA, forming homogeneously distributed catalytic domains in the sulfur cathode. Among the systems investigated, PVA‐Cu exhibits the highest catalytic activity, arising from optimal sulfur binding energies, Cu‐S d‐p hybridization, and additional electronic states near the Fermi level. As a result, the PVA‐Cu cells deliver high capacities at 3 mg cm −2 of 1,100 mAh g −1 at 1 C with 82% capacity retention over 300 cycles, while at higher loadings of 9 mg cm −2 , the cells deliver 813 mAh g −1 (7.3 mAh cm −2 ) at 0.5 C. In a pouch cell prototype, stable cycling at 0.5 C delivers a discharge capacity of 790 mAh g −1 and a power density of 150 W kg −1 , which lies within the upper range of reported Li‐S pouch‐cell performance in terms of operating rate and power density.

Schlagwörter

Stichwörter der Autor:innen

high‐power pouch‐cellslithium‐sulfur batterymetal catalystsmicroenvironment engineeringpolymer‐metal complexes

Autor:innen und Institutionen

  • Nanoscale Science and Engineering Laboratory (NSEL), Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, VIC, Australia.
  • ARC Research Hub For Advanced Manufacturing With 2D Materials, Monash University, Melbourne, VIC, Australia.
  • Department of Materials Science and Engineering, Monash University, Melbourne, VIC, Australia.
  • Department of Chemical & Biological Engineering, Monash University, Melbourne, VIC, Australia.
  • Department of Chemical and Environmental Engineering, RMIT University, Melbourne, VIC, Australia.

ORCID-Profile: Maleesha M Nishshanke, Petar Jovanovic, Akshat Tanksale, Matthew Hill, Mainak Majumder

Förderung

  • Air Force Office of Scientific Research
  • Australian Research Council

Zitieren

APA

Nishshanke, M. M., Jovanovic, P., Dwivedi, S., McNamara, D., Tanksale, A., Shaibani, M., Hill, M., & Majumder, M. (2026). Bidirectional Soft Catalysts for Improved Power Performance of Li‐S Batteries. Advanced Science, 13(62). https://doi.org/10.1002/advs.77302

Vancouver

Nishshanke MM, Jovanovic P, Dwivedi S, McNamara D, Tanksale A, Shaibani M, et al. Bidirectional Soft Catalysts for Improved Power Performance of Li‐S Batteries. Advanced Science. 2026;13(62). doi:10.1002/advs.77302

BibTeX
@article{Nishshanke2026,
  author = {Nishshanke, Maleesha M and Jovanovic, Petar and Dwivedi, Swarit and McNamara, Declan and Tanksale, Akshat and Shaibani, Mahdokht and Hill, Matthew and Majumder, Mainak},
  title = {Bidirectional Soft Catalysts for Improved Power Performance of Li‐S Batteries},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {62},
  doi = {10.1002/advs.77302}
}
Kostenlos starten →