Geometry‐Regulated Electrode‐Wide Nucleation Patterns in Aqueous Zinc Anodes
Advanced Science · 06.09.2026
DOI: 10.1002/advs.77286 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 06.09.2026. Verfasst von Seyoung Han und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Future Convergence Engineering, Kongju National University, Cheonan, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea government, National Research Foundation of Korea, Environment (MCEE) of the Republic of Korea.
Abstract (Originalsprache)
Zinc metal is a promising anode for aqueous zinc batteries due to its high theoretical capacity and low cost. However, its practical implementation remains limited by dendrite formation and interfacial instability. Herein, we present a geometry‐driven strategy that regulates Zn deposition through control of the hole opening ratio (HOR) in laser‐ablated three‐dimensional hole‐patterned Zn foil. Based on preferential Zn deposition at periodically arranged hole edges, HOR was introduced as a geometric parameter that dictates the spatial density of nucleation sites. Systematic variation of the HOR reveals that it governs the dispersion and size of early‐stage Zn deposits, defining the electrode‐wide nucleation pattern and subsequent growth behavior. The optimized HOR balances sparse nucleation with localized growth and dense nucleation with coalescence‐driven aggregation, enabling spatially uniform Zn deposition. As a result, the HOR‐tailored electrode achieves dendrite‐free deposition with long‐term stability in symmetric cells (3400 h at 0.5 mA cm −2 ) and maintains stable cycling in full cells paired with a Zn pre‐intercalated NH 4 V 4 O 10 cathode (1000 cycles at 2 A g −1 ). By establishing HOR‐controlled nucleation density as a geometry‐based design principle, this defect‐engineered and materials‐independent approach provides a general design framework for high‐performance aqueous metal batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Future Convergence Engineering, Kongju National University, Cheonan, Republic of Korea.
- Department of Chemical Engineering, Kongju National University, Cheonan, Republic of Korea.
- Center for Future Sustainable Technology, Kongju National University, Cheonan, Republic of Korea.
- Global Institute of Manufacturing Technology (GITECH), Kongju National University, Cheonan, Republic of Korea.
- Department of Mechanical and Automotive Engineering, Kongju National University, Cheonan, Republic of Korea.
- Department of Semiconductor Engineering, Kongju National University, Cheonan, Republic of Korea.
ORCID-Profile: Seyoung Han, Taehyun Lee, Ji Hyun Um, Dongkyoung Lee
Förderung
- Korea government
- National Research Foundation of Korea
- Environment (MCEE) of the Republic of Korea
- Korea Institute for Advancement of Technology (KIAT)
Zitieren
APA
Han, S., Lee, T., Kim, H., Um, J. H., & Lee, D. (2026). Geometry‐Regulated Electrode‐Wide Nucleation Patterns in Aqueous Zinc Anodes. Advanced Science. https://doi.org/10.1002/advs.77286
Vancouver
Han S, Lee T, Kim H, Um JH, Lee D. Geometry‐Regulated Electrode‐Wide Nucleation Patterns in Aqueous Zinc Anodes. Advanced Science. 2026. doi:10.1002/advs.77286
BibTeX
@article{Han2026,
author = {Han, Seyoung and Lee, Taehyun and Kim, Haeun and Um, Ji Hyun and Lee, Dongkyoung},
title = {Geometry‐Regulated Electrode‐Wide Nucleation Patterns in Aqueous Zinc Anodes},
journal = {Advanced Science},
year = {2026},
doi = {10.1002/advs.77286}
}
EUVIMED