EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lithium‐Ion Battery Safety Evaluation by Quantifying Lithium Plating Degree Based on Pressure Signals

Haonan Liu, Jiangong Zhu iD, Wenyuan Weng, Bin Shen, Wenjun Fan, Yang Wang, Huapeng Lu, Wuliyasu He, Chunjing Lin, Xuezhe Wei, Haifeng Dai iD

Advanced Science · 2026-11 · 13 (61)

DOI: 10.1002/advs.77129 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 11.08.2026. Verfasst von Haonan Liu und 10 weiteren Autor:innen. Beteiligte Einrichtung: College of Automotive and Energy Engineering, Tongji University, Shanghai, China. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Major State Basic Research Development Program of China, Jiading District Science and Technology Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium (Li) plating poses a major challenge to the thermal safety of lithium‐ion batteries (LIBs). In this work, low N/P LIBs are constructed to induce controllable Li‐plating, and thermal response tests are performed to correlate Li‐plating degree with thermal safety characteristics. A quantitative descriptor of Li‐plating degree ( D Li ) is established, and post‐mortem characterizations show that increasing D Li is accompanied by the accumulation of Li‐plating and side‐reaction products, along with aggravated interfacial degradation. Based on the evolution of pressure signals during calibration, a non‐destructive diagnostic model for D Li is further developed. Accelerating rate calorimeter (ARC) results show that the first detectable self‐heating temperature of low N/P cells decreases monotonically with increasing D Li , indicating a progressively reduced thermal safety margin. Accordingly, D Li thresholds of 20% and 30% are identified, and a thermal safety grading and battery management framework is established. Cross‐scale validation in commercial 12 Ah cells shows that the predicted D Li values and safety grades agree well with the observed thermal runaway behaviors. Overall, this work advances Li‐plating assessment from occurrence identification to the quantitative diagnosis of Li‐plating degree and the corresponding thermal safety grading. The proposed framework provides a basis for Li‐plating risk assessment and safety evaluation of LIBs.

Schlagwörter

Stichwörter der Autor:innen

Li‐plating degreeN/P ratiolithium‐ion batterypressurethermal safety

Autor:innen und Institutionen

  • College of Automotive and Energy Engineering, Tongji University, Shanghai, China.
  • Clean Energy Automotive Engineering Center, Tongji University, Shanghai, China.
  • Volvo Car Technology (Shanghai) Co., Ltd, Shanghai, China.
  • Key Laboratory of Advanced Manufacturing Technology for Automobile Parts, Ministry of Education, Chongqing University of Technology, Chongqing, China.

ORCID-Profile: Jiangong Zhu, Haifeng Dai

Förderung

  • National Natural Science Foundation of China
  • Major State Basic Research Development Program of China
  • Jiading District Science and Technology Project

Zitieren

APA

Liu, H., Zhu, J., Weng, W., Shen, B., Fan, W., Wang, Y., Lu, H., He, W., Lin, C., Wei, X., & Dai, H. (2026). Lithium‐Ion Battery Safety Evaluation by Quantifying Lithium Plating Degree Based on Pressure Signals. Advanced Science, 13(61). https://doi.org/10.1002/advs.77129

Vancouver

Liu H, Zhu J, Weng W, Shen B, Fan W, Wang Y, et al. Lithium‐Ion Battery Safety Evaluation by Quantifying Lithium Plating Degree Based on Pressure Signals. Advanced Science. 2026;13(61). doi:10.1002/advs.77129

BibTeX
@article{Liu2026,
  author = {Liu, Haonan and Zhu, Jiangong and Weng, Wenyuan and Shen, Bin and Fan, Wenjun and Wang, Yang and Lu, Huapeng and He, Wuliyasu and Lin, Chunjing and Wei, Xuezhe and Dai, Haifeng},
  title = {Lithium‐Ion Battery Safety Evaluation by Quantifying Lithium Plating Degree Based on Pressure Signals},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {61},
  doi = {10.1002/advs.77129}
}
Kostenlos starten →