Grain Boundary Structure Ordering via Electroshock Treatment Enhances Strength‐Ductility Synergy
Advanced Science · 19.08.2026
DOI: 10.1002/advs.77128 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 19.08.2026. Verfasst von Jiancheng Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Light Superalloys, Wuhan University of Technology, Wuhan, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Project, National Natural Science Foundation of China, 111 Project.
Abstract (Originalsprache)
High‐energy electropulsing triggers recrystallization and phase transformation via excessive Joule heating, potentially causing unwanted damage and compromising the bulk microstructure. Herein, a non‐destructive, low‐energy electric current strategy, termed electroshock treatment (EST), is developed to strengthen grain boundaries (GBs), the preferential site for crack initiation and propagation, while preserving the bulk microstructure. Using α‐Ti as a model system, this strategy achieves a synergistic enhancement of strength and ductility by transforming the defect‐rich GB structure into an ordered atomic arrangement. In situ micropillar compression tests confirm a significant increase in GB strength after EST, while molecular dynamics (MD) simulations reveal that ordered GBs, owing to their lower density of defects, raise the critical stress for dislocation emission and exhibit greater resistance to intergranular fracture. Additionally, a reduction in dislocation density after EST contributes to enhanced ductility. These findings provide a promising GB‐structure‐engineering pathway to reinforce polycrystalline metallic materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Light Superalloys, Wuhan University of Technology, Wuhan, China.
- Department of Mechanical Engineering, Research Institute for Advanced Manufacturing, The Hong Kong Polytechnic University, Kowloon, Hong Kong, China.
- School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, China.
- Hubei Engineering Research Center for Green Precision Material Forming, Wuhan, China.
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China.
- Yangtze Laboratory, Wuhan, China.
ORCID-Profile: Jiancheng Chen, Dongsheng Qian, Jinsong Wu, Mingwang Fu
Förderung
- National Key Research and Development Project
- National Natural Science Foundation of China
- 111 Project
- Hubei Provincial Science and Technology Innovation Talents and Service Project
- Fundamental Research Funds for the Central Universities
- Higher Education Discipline Innovation Project
Zitieren
APA
Chen, J., Wang, F., Qian, D., Wang, H., Wu, J., Fu, M., & Hua, L. (2026). Grain Boundary Structure Ordering via Electroshock Treatment Enhances Strength‐Ductility Synergy. Advanced Science. https://doi.org/10.1002/advs.77128
Vancouver
Chen J, Wang F, Qian D, Wang H, Wu J, Fu M, et al. Grain Boundary Structure Ordering via Electroshock Treatment Enhances Strength‐Ductility Synergy. Advanced Science. 2026. doi:10.1002/advs.77128
BibTeX
@article{Chen2026,
author = {Chen, Jiancheng and Wang, Feng and Qian, Dongsheng and Wang, Huiling and Wu, Jinsong and Fu, Mingwang and Hua, Lin},
title = {Grain Boundary Structure Ordering via Electroshock Treatment Enhances Strength‐Ductility Synergy},
journal = {Advanced Science},
year = {2026},
doi = {10.1002/advs.77128}
}
EUVIMED