EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Highly Robust Sn‐Based MAX Anodes Constructed via Ti 6 C Octahedral Outer Immobilization and A‐Layer Fe Inner Anchoring for Long‐Life Lithium‐Ion Batteries

Yu-Ang Lei, Yuchen Guo, Linkai He, Yi Tang, Junhui Zou, Yangyang Xie, Xiaodie Xuan, Zhao Bi, Yu Wang, Ting Liu, Yunqing Kang iD, Taotao Ai und 2 weitere

Advanced Science · 2026-06 · 13 (34)

DOI: 10.1002/advs.75085 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 10.04.2026. Verfasst von Yu-Ang Lei und 13 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi, P. R. China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation, Shaanxi Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tin (Sn)‐based anodes offer notable potential for lithium‐ion batteries (LIBs) due to their high theoretical capacity and abundance. However, incomplete lithium insertion and severe volume expansion cause capacity degradation and electrode pulverization, limiting the practical application. To overcome these challenges, we utlize the unique MAX phase structure to stabilize the Sn in the A‐layer between Ti 6 C octahedra while using Fe as inner anchors in the same layer to strongly enhance the Ti–Sn bonding. Based on this design, the highly robust Sn‐based anode materials — layered Ti 2 Sn 1‐ x Fe x C solid‐solution MAX phases with refined grains — are synthesized via a feasible atmosphere sintering followed by ball milling method. The effects of different Fe contents ( x = 0, 0.10, 0.20, 0.33) on structural stability and lithium storage capacity are also clarified. Among them, the Ti 2 Sn 0.67 Fe 0.33 C electrode exhibits a high specific capacity of 480 mAh g −1 at 0.05 A g −1 and maintains a specific capacity of 210 mAh g −1 after 2000 cycles at 1 A g −1 with an average coulombic efficiency of 99.55%, outperforming most of previously reported MAX anode materials. This study presents new material design strategies that help overcome the intrinsic limitations of Sn‐based anodes, while simultaneously expanding the MAX‐phase family.

Schlagwörter

Stichwörter der Autor:innen

MAX phaseSn‐based anodecycling stabilitylithium storage

Autor:innen und Institutionen

  • School of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi, P. R. China.
  • College of Materials Science and Engineering, Xi'an University of Science and Technology, Xi'an, Shaanxi, P. R. China.
  • State Key Laboratory of Solidification Processing, Center For Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi, P. R. China.
  • Department of Materials Process Engineering, Graduate School of Engineering, Nagoya University, Nagoya, Japan.
  • School of Materials Science and Engineering, Shaanxi University of Technology, Hanzhong, Shaanxi, P. R. China.
  • Australian Institute For Bioengineering and Nanotechnology (AIBN), The University of Queensland, Brisbane, Queensland, Australia.

ORCID-Profile: Yunqing Kang, Chenhui Yang

Förderung

  • National Natural Science Foundation of China
  • China Postdoctoral Science Foundation
  • Shaanxi Postdoctoral Science Foundation
  • Key Research and Development Project of Xianyang City
  • Outstanding Youth Science Fund of Xi'an University of Science and Technology
  • Start-up Fund for High-level Researchers of Xi'an University of Science and Technology
  • JST-ERATO Materials Space-Tectonics Project
  • ARC Australian Laureate Fellowship

Zitieren

APA

Lei, Y. A., Guo, Y., He, L., Tang, Y., Zou, J., Xie, Y., Xuan, X., Bi, Z., Wang, Y., Liu, T., Kang, Y., Ai, T., Yamauchi, Y., & Yang, C. (2026). Highly Robust Sn‐Based MAX Anodes Constructed via Ti 6 C Octahedral Outer Immobilization and A‐Layer Fe Inner Anchoring for Long‐Life Lithium‐Ion Batteries. Advanced Science, 13(34). https://doi.org/10.1002/advs.75085

Vancouver

Lei YA, Guo Y, He L, Tang Y, Zou J, Xie Y, et al. Highly Robust Sn‐Based MAX Anodes Constructed via Ti 6 C Octahedral Outer Immobilization and A‐Layer Fe Inner Anchoring for Long‐Life Lithium‐Ion Batteries. Advanced Science. 2026;13(34). doi:10.1002/advs.75085

BibTeX
@article{Lei2026,
  author = {Lei, Yu-Ang and Guo, Yuchen and He, Linkai and Tang, Yi and Zou, Junhui and Xie, Yangyang and Xuan, Xiaodie and Bi, Zhao and Wang, Yu and Liu, Ting and Kang, Yunqing and Ai, Taotao and Yamauchi, Yusuke and Yang, Chenhui},
  title = {Highly Robust Sn‐Based MAX Anodes Constructed via Ti 6 C Octahedral Outer Immobilization and A‐Layer Fe Inner Anchoring for Long‐Life Lithium‐Ion Batteries},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {34},
  doi = {10.1002/advs.75085}
}
Kostenlos starten →