Hierarchical MXene/ZnO Nanorods: WO 3 /CNT Trilayer Coatings on Cotton for High‐Performance Multifunctional Wearable Fabrics
Advanced Science · 2026-05 · 13 (25)
DOI: 10.1002/advs.202521175 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 18.03.2026. Verfasst von Thirumalaisamy Suryaprabha und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Intelligent Semiconductor Engineering, Chung-Ang University, Seoul, Republic of Korea. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.
Abstract (Originalsprache)
Fabric‐based wearable electronics are gaining increasing attention owing to their flexibility, breathability, biocompatibility, and seamless integration into clothing. However, most existing studies rely primarily on metallic or carbon‐based conductive materials. In contrast, the integration of semiconducting metal oxides in wearable textiles remains limited, despite their advantages in achieving tunable electrical and thermal responses. In this study, we developed a sandwich‐structured coating on cotton fabric, where a semiconductive layer of WO 3 ‐doped ZnO nanorods was embedded between two conductive layers of MXene and carbon nanotubes (CNTs). This hierarchical and heterogeneous coating architecture enabled synergistic interactions that significantly enhance multifunctional performance. The engineered fabric exhibited reliable strain sensing with a short response and recovery time (∼200 ms), excellent mechanical durability over 2000 stretch/release cycles, and the ability to monitor human motion. Furthermore, the fabric demonstrated efficient Joule heating, reaching ∼110°C within ∼15 s, and high electromagnetic interference (EMI) shielding effectiveness (∼34.4 dB), which increased to ∼78 dB by raising fabric thickness, meeting commercial EMI standards. Notably, these functionalities were achieved without compromising flexibility, light weight, and breathability. Thus, this study presents a new paradigm for designing multifunctional textile electronics by integrating semiconductive and conductive nanomaterials, overcoming the limitations of conventional conductive‐only approaches.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Intelligent Semiconductor Engineering, Chung-Ang University, Seoul, Republic of Korea.
- School of Integrative Engineering, Chung-Ang University, Seoul, Republic of Korea.
- Department of Flexible and Printable Electronics, LANL-JBNU Engineering Institute-Korea, Jeonbuk National University, Jeonju, Republic of Korea.
- Department of JBNU-KIST Industry-Academia Convergence Research, Jeonbuk National University, Jeonju, Republic of Korea.
- Department of Chemistry and Chemical Engineering, Chalmers University of Technology, Göteborg, Sweden.
ORCID-Profile: Ergang Wang, Byungil Hwang
Förderung
- National Research Foundation of Korea
Zitieren
APA
Suryaprabha, T., Choi, C., Lal, S., Seo, M. Y., Kim, T. W., Wang, E., & Hwang, B. (2026). Hierarchical MXene/ZnO Nanorods: WO 3 /CNT Trilayer Coatings on Cotton for High‐Performance Multifunctional Wearable Fabrics. Advanced Science, 13(25). https://doi.org/10.1002/advs.202521175
Vancouver
Suryaprabha T, Choi C, Lal S, Seo MY, Kim TW, Wang E, et al. Hierarchical MXene/ZnO Nanorods: WO 3 /CNT Trilayer Coatings on Cotton for High‐Performance Multifunctional Wearable Fabrics. Advanced Science. 2026;13(25). doi:10.1002/advs.202521175
BibTeX
@article{Suryaprabha2026,
author = {Suryaprabha, Thirumalaisamy and Choi, Chunghyeon and Lal, Sujith and Seo, Min-Young and Kim, Tae-Wook and Wang, Ergang and Hwang, Byungil},
title = {Hierarchical MXene/ZnO Nanorods: WO 3 /CNT Trilayer Coatings on Cotton for High‐Performance Multifunctional Wearable Fabrics},
journal = {Advanced Science},
year = {2026},
volume = {13},
number = {25},
doi = {10.1002/advs.202521175}
}
EUVIMED