EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Revolutionizing Lithium Metal Anodes With 3D‐Printed Topology‐Optimized Hosts for Enhanced Stability

Xin Hu, Yimin Chen, Yun-Fei Fu, Daoguang Bi, Baozhi Yu iD, Ying Ian Chen

Advanced Science · 2026-06 · 13 (32)

DOI: 10.1002/advs.202521086 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 25.03.2026. Verfasst von Xin Hu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Frontier Materials, Deakin University, Waurn Ponds, Victoria, Australia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium metal anodes (LMAs) are a key material for next‐generation high‐energy‐density batteries due to their high theoretical capacity and low electrochemical potential. However, their practical use is hindered by issues such as uncontrolled volume expansion and lithium dendrite growth, especially under deep charge/discharge cycling. In this study, a novel LMA host is designed using topology optimization, which directly links structural design with porosity and mechanical stability. Through iterative calculations, reinforced structures are developed that provide support at critical points such as the center, edges, and corners, effectively distributing stress and limiting volume changes during expansion. The topology‐optimized host is fabricated using digital light processing (DLP) 3D printing, whose high resolution and accuracy make it ideal for reproducing complex microstructures. Symmetric cell tests show that the TP host/LMA system maintains stable cycling for over 1000 h under ultra‐high current density (20 mA cm − 2 ) and high capacity (20 mAh cm − 2 ). Moreover, in full cells with a LiFePO 4 cathode, the topology‐structured lithium composite anode retains 95.2% of its capacity after 150 cycles at 5 C. This work demonstrates the potential of combining topology optimization and 3D printing to create ultra‐stable, high‐performance LMAs, and opens a new avenue for the design of advanced batteries.

Schlagwörter

Stichwörter der Autor:innen

3D‐printingadditive manufacturinglithium metal anodetopology optimization

Autor:innen und Institutionen

  • Institute for Frontier Materials, Deakin University, Waurn Ponds, Victoria, Australia.
  • College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, Shandong, China.

ORCID-Profile: Baozhi Yu

Förderung

  • Australian Research Council

Zitieren

APA

Hu, X., Chen, Y., Fu, Y. F., Bi, D., Yu, B., & Chen, Y. I. (2026). Revolutionizing Lithium Metal Anodes With 3D‐Printed Topology‐Optimized Hosts for Enhanced Stability. Advanced Science, 13(32). https://doi.org/10.1002/advs.202521086

Vancouver

Hu X, Chen Y, Fu YF, Bi D, Yu B, Chen YI. Revolutionizing Lithium Metal Anodes With 3D‐Printed Topology‐Optimized Hosts for Enhanced Stability. Advanced Science. 2026;13(32). doi:10.1002/advs.202521086

BibTeX
@article{Hu2026,
  author = {Hu, Xin and Chen, Yimin and Fu, Yun-Fei and Bi, Daoguang and Yu, Baozhi and Chen, Ying Ian},
  title = {Revolutionizing Lithium Metal Anodes With 3D‐Printed Topology‐Optimized Hosts for Enhanced Stability},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {32},
  doi = {10.1002/advs.202521086}
}
Kostenlos starten →