EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermoelectric Property Mapping for High‐Performance Integrated MgAgSb‐MgCuSb System

Jiankang Li, Airan Li, Longquan Wang, Xinzhi Wu, Raju Chetty, Takao Mori iD

Advanced Science · 2026-03 · 13 (17)

DOI: 10.1002/advs.202520889 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 15.01.2026. Verfasst von Jiankang Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for Materials Nanoarchitectonics (MANA), National Institute for Materials Science (NIMS), Tsukuba, Japan. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: JST-Mirai Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To achieve high conversion efficiency in thermoelectric (TE) modules, not only thermoelectric materials (TEMs) with high figure‐of‐merit zT but also the optimization of thermoelectric interface materials (TEiMs) is required. For TEMs, enhancing zT relies on increasing power factor PF and lowering thermal conductivity κ , while for TEiMs, high electrical conductivity and κ are essential, which highlights the importance of the integrated design of TEMs and TEiMs. In this work, we select p‐type MgAgSb as the object and construct a TE property mapping of the integrated MgAgSb–MgCuSb two‐phase system by tuning the Ag/Cu ratio. Based on the thermoelectric property mapping, Ag‐rich compositions exhibit superior PF and zT values for TEM, maximized in PF∼21 µW cm −1 K −2 , zT = 1.12 for MgAg 0.97 Cu 0.03 Sb. Conversely, Cu‐rich composition MgAg 0.05 Cu 0.95 Sb is identified as the optimal TEiM for its low contact resistance and superior carrier and phonon transport properties, reducing energy loss. A two‐pair thermoelectric module integrated with n‐type Mg 3 (Sb, Bi) 2 is successfully fabricated, yielding a peak conversion efficiency of ∼7.2%, thereby advancing the performance of current Mg‐based TE modules. Overall, this study realizes the synergistic optimization of high‐performance TE materials and compatible TE interface materials, paving the way for the fabrication of efficient and scalable TE modules.

Schlagwörter

Stichwörter der Autor:innen

MgAgSbMgCuSbhigh‐efficiencyinterfacethermoelectric

Autor:innen und Institutionen

  • Research Center for Materials Nanoarchitectonics (MANA), National Institute for Materials Science (NIMS), Tsukuba, Japan.
  • Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba, Japan.

ORCID-Profile: Takao Mori

Förderung

  • JST-Mirai Program

Zitieren

APA

Li, J., Li, A., Wang, L., Wu, X., Chetty, R., & Mori, T. (2026). Thermoelectric Property Mapping for High‐Performance Integrated MgAgSb‐MgCuSb System. Advanced Science, 13(17). https://doi.org/10.1002/advs.202520889

Vancouver

Li J, Li A, Wang L, Wu X, Chetty R, Mori T. Thermoelectric Property Mapping for High‐Performance Integrated MgAgSb‐MgCuSb System. Advanced Science. 2026;13(17). doi:10.1002/advs.202520889

BibTeX
@article{Li2026,
  author = {Li, Jiankang and Li, Airan and Wang, Longquan and Wu, Xinzhi and Chetty, Raju and Mori, Takao},
  title = {Thermoelectric Property Mapping for High‐Performance Integrated MgAgSb‐MgCuSb System},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {17},
  doi = {10.1002/advs.202520889}
}
Kostenlos starten →