3D‐Printed Ion‐Conductive Hydrogels with Tunable Mechanical–Electrical Properties for Multimodal Sign Language Recognition
Advanced Science · 2026
DOI: 10.1002/advs.202520586 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, 2026. Verfasst von Quan Hu und 9 weiteren Autor:innen. Beteiligte Einrichtung: Shien-Ming Wu School of Intelligent Engineering, South China University of Technology, Guangzhou, China. Hauptthemen laut MEDLINE: Hydrogels, Sign Language, Printing, Three-Dimensional, Wearable Electronic Devices. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Sign language recognition technology holds significant importance for eliminating communication barriers faced by the hearing‐impaired population. To address the limitations of current wearable sensors‒such as complex fabrication or materials incompatibility within an integrated system, this study designed a 3D printed ion‐conductive hydrogel with tunable electromechanical performances for versatile wearable sensing. The hydrogel is primarily based on a polyampholyte network interpenetrated with a polyacrylamide (PAAM) framework and synergistically integrated with LiCl and a covalent organic framework (COF) to enhance its electromechanical performance. It exhibits low hysteresis (90.25% recovery ratio) with high elongation (550%) and large compressive strain tolerance (90%) for strain/pressure sensing, while its low modulus (0.09 MPa) and high conductivity (0.23 S m − 1 ) enabled high‐fidelity surface electromyography (sEMG) sensing. Leveraging these multifunctional hydrogels, we developed a multimodal sign language recognition system consisting of a pair of digital gloves, each embedded with 12 strain sensors and 5 pressure sensors, together with a flexible armband integrated with a 10‐channel differential sEMG electrode array. Coupled with a bidirectional long short‐term memory (Bi‐LSTM) multimodal fusion model, the system achieved a classification accuracy of 99.65% across 24 Chinese sign language gestures.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Shien-Ming Wu School of Intelligent Engineering, South China University of Technology, Guangzhou, China.
- School of Mechatronic Engineering, Guangdong Polytechnic Normal University, Guangzhou, China.
- Department of Rehabilitation Medicine, The Sixth Affiliated Hospital of Sun Yat-Sen University, Guangzhou, China.
- Guangdong Provincial Clinical Research Center For Rehabilitation Medicine, Guangzhou, China.
ORCID-Profile: Hongjie Jiang
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Hu, Q., Xiao, L., Zhang, P., Zhang, Q., Liu, G., Qin, X., Yin, Z., Li, X., Wang, Y., & Jiang, H. (2026). 3D‐Printed Ion‐Conductive Hydrogels with Tunable Mechanical–Electrical Properties for Multimodal Sign Language Recognition. Advanced Science. https://doi.org/10.1002/advs.202520586
Vancouver
Hu Q, Xiao L, Zhang P, Zhang Q, Liu G, Qin X, et al. 3D‐Printed Ion‐Conductive Hydrogels with Tunable Mechanical–Electrical Properties for Multimodal Sign Language Recognition. Advanced Science. 2026. doi:10.1002/advs.202520586
BibTeX
@article{Hu2026,
author = {Hu, Quan and Xiao, Longya and Zhang, Peiqi and Zhang, Qiurui and Liu, Guangsen and Qin, Xinglin and Yin, Zhuhui and Li, Xian and Wang, Yuling and Jiang, Hongjie},
title = {3D‐Printed Ion‐Conductive Hydrogels with Tunable Mechanical–Electrical Properties for Multimodal Sign Language Recognition},
journal = {Advanced Science},
year = {2026},
doi = {10.1002/advs.202520586}
}
EUVIMED