Mortise‐Tenon Joint Inspired Weakly Solvated Gel Electrolyte Based on Halogen Bonds for High‐Voltage Lithium Metal Batteries
Advanced Science · 2026-02 · 13 (7)
DOI: 10.1002/advs.202518448 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 16.11.2025. Verfasst von Shuohan Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Instrumental Analysis Center at SJTU.
Abstract (Originalsprache)
In situ gel polymer electrolytes (GPEs) offer a promising approach to improve safety and cycling stability in lithium metal batteries (LMBs), yet often suffer from poor electrode compatibility, especially at high temperatures. This work reports a “mortise‐tenon joint” inspired non‐covalent interaction — “π‐hole” based halogen bond, that enables solvation structure regulation beyond traditional van der Waals force or hydrogen bond. The electrophilic π‐hole on the polymer skeleton engages in halogen bonding with solvents, thereby weakening their coordination with Li + to form a weakly solvated structure. Moreover, the fluorine‐rich skeleton participates in the formation of the electrode‐electrolyte interphases, achieving good anode compatibility and high‐voltage stability simultaneously. The resulting electrolyte exhibits high ionic conductivity (0.30 mS cm −1 ) and a Li + transference number of 0.84. Li symmetric cells stably cycle over 1000 h. The Li/LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cell delivers discharge specific capacities of 161.0 mAh g −1 after 500 cycles at 1C. Especially, the cell can work stably for 100 cycles at 80 °C (1C, 156.0 mAh g −1 ). Furthermore, the pouch cell achieves an energy density of 462.2 Wh kg −1 . This study demonstrates that the concept of a weakly solvated gel electrolyte based on halogen bonds provides a new approach to achieving high‐energy‐density LMBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China.
- State Key Laboratory of Space Power-Sources, Shanghai Institute of Space Power-Sources, Shanghai, 200245, China.
- School of Materials Science and Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, Shandong, 250353, China.
- School of Materials and Chemistry, University of Shanghai for Science and Technology, Shanghai, 200093, China.
ORCID-Profile: Shenmin Zhu
Förderung
- National Natural Science Foundation of China
- Instrumental Analysis Center at SJTU
Zitieren
APA
Liu, S., Tian, W., Pan, H., Chen, S., Han, X., Quan, H., & Zhu, S. (2026). Mortise‐Tenon Joint Inspired Weakly Solvated Gel Electrolyte Based on Halogen Bonds for High‐Voltage Lithium Metal Batteries. Advanced Science, 13(7). https://doi.org/10.1002/advs.202518448
Vancouver
Liu S, Tian W, Pan H, Chen S, Han X, Quan H, et al. Mortise‐Tenon Joint Inspired Weakly Solvated Gel Electrolyte Based on Halogen Bonds for High‐Voltage Lithium Metal Batteries. Advanced Science. 2026;13(7). doi:10.1002/advs.202518448
BibTeX
@article{Liu2026,
author = {Liu, Shuohan and Tian, Wensheng and Pan, Hui and Chen, Shunwei and Han, Xiujun and Quan, Hengdao and Zhu, Shenmin},
title = {Mortise‐Tenon Joint Inspired Weakly Solvated Gel Electrolyte Based on Halogen Bonds for High‐Voltage Lithium Metal Batteries},
journal = {Advanced Science},
year = {2026},
volume = {13},
number = {7},
doi = {10.1002/advs.202518448}
}
EUVIMED