Self‐Healing and Reprocessable Soft Robots Using 3D Digital Light Printing
Advanced Science · 2026-01 · 13 (2)
DOI: 10.1002/advs.202516901 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 03.11.2025. Verfasst von Chenggang Yuan und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Bath, Bath, BA2 7AY, UK. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Soft robots manufactured from compliant materials are highly versatile and can interact safely with humans while performing complex tasks. However, their low modulus and high compliance make them vulnerable to mechanical damage. Here, we synthesise soft, self‐healing, and recyclable robots featuring complex air chambers using 3D digital light printing technology. The formulated monomers and cross‐linkers are polymerized layer‐by‐layer using photoinitiated free‐radical polymerization during the printing process to form soft objects on a moving metal substrate. Dynamic chemistry is introduced into the polymer by designing cross‐linker structures, whereby vinylogous urethanes‐bearing cross‐linkers of different chain lengths are studied to allow the cross‐linked elastomer networks to be thermally triggerable for self‐healing and reprocessing. The resultant elastomer exhibits a tensile strength of 3.51 ± 0.1 MPa and an elongation at break of 454 ± 56% with optimized formulations and printing parameters. The printed soft grippers and crawlers are investigated for their static and dynamic performance after being punctured, cut in half, and left to self‐heal at room temperature for 24 h. They exhibit excellent self‐healing capabilities with efficiencies of 94.5% and 87.5%, respectively. This new approach creates self‐healing, recyclable soft robots with complex geometries through additive manufacturing, enabling sustainable, resilient robots for challenging environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, University of Bath, Bath, BA2 7AY, UK.
- International Institute for Nanocomposites Manufacturing (IINM), University of Warwick, Coventry, CV4 7AL, UK.
- Department of Chemistry, University of Warwick, Coventry, CV4 7AL, UK.
ORCID-Profile: Min Pan
Zitieren
APA
Yuan, C., Qin, Y., Liu, M., Lee, W. H., Drelingas, M., Fieldhouse, S., Wemyss, A. M., Tay, P. S., Haddleton, D. M., Bowen, C., Wan, C., & Pan, M. (2026). Self‐Healing and Reprocessable Soft Robots Using 3D Digital Light Printing. Advanced Science, 13(2). https://doi.org/10.1002/advs.202516901
Vancouver
Yuan C, Qin Y, Liu M, Lee WH, Drelingas M, Fieldhouse S, et al. Self‐Healing and Reprocessable Soft Robots Using 3D Digital Light Printing. Advanced Science. 2026;13(2). doi:10.1002/advs.202516901
BibTeX
@article{Yuan2026,
author = {Yuan, Chenggang and Qin, Yuqing and Liu, Miaomiao and Lee, Wai Hin and Drelingas, Mantas and Fieldhouse, Sebastian and Wemyss, Alan M and Tay, Poh Sheng and Haddleton, David M and Bowen, Chris and Wan, Chaoying and Pan, Min},
title = {Self‐Healing and Reprocessable Soft Robots Using 3D Digital Light Printing},
journal = {Advanced Science},
year = {2026},
volume = {13},
number = {2},
doi = {10.1002/advs.202516901}
}
EUVIMED