EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Morphology Formation Pathways in Solution‐Processed Perovskite Thin Films

Martin Majewski iD, Olivier J J Ronsin iD, Jens Harting iD

Advanced Science · 2026-01 · 13 (5)

DOI: 10.1002/advs.202516701 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 21.10.2025. Verfasst von Martin Majewski und 2 weiteren Autor:innen. Beteiligte Einrichtung: Helmholtz Institute Erlangen-Nürnberg for Renewable Energy (HIERN), Forschungszentrum Jülich GmbH, Jülich, Germany. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, European Commission, Helmholtz Association.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The active layer in a perovskite solar cell is usually composed of a polycrystalline thin film. Fabrication of this layer by solution processing is a promising candidate for up‐scaling to the mass market. However, the evolution of an evaporating and simultaneously crystallizing thin film is not yet fully understood. To contribute to the understanding of the formation of thin films, a geometrical model is developed that deals with the effect of the interplay between solvent evaporation and crystal growth on the dry film morphology. The possible film formation mechanisms are investigated, depending on the processing conditions. Eleven formation pathways are found leading to four distinct morphologies. It is shown how these formation pathways can be utilized by adapting the process parameters to the material properties. Pinhole‐free and flat films can be fabricated if the evaporation rate is high in comparison to the crystal growth rate. Alternatively, providing a high crystal number density on the substrate can lead to the desired film morphology at low drying rates. The generality of the model makes it applicable to any evaporating and simultaneously crystallizing thin film.

Schlagwörter

Stichwörter der Autor:innen

modelperovskite solar cellthin film

Autor:innen und Institutionen

  • Helmholtz Institute Erlangen-Nürnberg for Renewable Energy (HIERN), Forschungszentrum Jülich GmbH, Jülich, Germany.
  • Department of Chemical and Biological Engineering and Department of Physics, Friedrich-Alexander-Universität Erlangen-Nürnberg, Fürther Straße 248, 90429, Nürnberg, Germany.

ORCID-Profile: Martin Majewski, Olivier J J Ronsin, Jens Harting

Förderung

  • Deutsche Forschungsgemeinschaft
  • European Commission
  • Helmholtz Association

Zitieren

APA

Majewski, M., Ronsin, O. J. J., & Harting, J. (2026). Morphology Formation Pathways in Solution‐Processed Perovskite Thin Films. Advanced Science, 13(5). https://doi.org/10.1002/advs.202516701

Vancouver

Majewski M, Ronsin OJJ, Harting J. Morphology Formation Pathways in Solution‐Processed Perovskite Thin Films. Advanced Science. 2026;13(5). doi:10.1002/advs.202516701

BibTeX
@article{Majewski2026,
  author = {Majewski, Martin and Ronsin, Olivier J J and Harting, Jens},
  title = {Morphology Formation Pathways in Solution‐Processed Perovskite Thin Films},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {5},
  doi = {10.1002/advs.202516701}
}
Kostenlos starten →