Composition‐Controlled Cathode Protective Layer via Powder‐Atomic Layer Deposition for All‐Solid‐State Batteries
Advanced Science · 2026-01 · 13 (4)
DOI: 10.1002/advs.202514583 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 14.10.2025. Verfasst von Kyu Moon Kwon und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Chemical Engineering, Hanyang University, Ansan, 15588, South Korea. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nano & Material Technology Development Program, National R&D Program, National Research Foundation of Korea.
Abstract (Originalsprache)
Controlling the ionic and electronic conductivities of the protective layers on cathode active materials (CAMs) is critical for interface stabilization with sulfide‐based solid electrolytes in all‐solid‐state batteries (ASSBs). In this study, lithium zirconium oxide layers with varying compositions are grown on LiNi 0.8 Co 0.1 Mn 0.1 O 2 using an O 3 ‐based atomic layer deposition process. The ionic conductivity reaches 2.20 × 10 −7 S cm −1 at 25 °C, and the electronic conductivity ranges from 10 −10 to 10 −7 S cm −1 depending on composition. These composition‐dependent transport properties directly affect electrochemical performance, leading to a 4.5% difference in initial Coulombic efficiency and a 37% difference in long‐term retention. Compared to their uncoated counterparts, the coated CAMs exhibited 6.7% and 43% increases in initial efficiency and capacity retention of the cells, respectively. This study establishes a quantitative correlation between the protective layer's composition and battery performance, emphasizing that composition control is a key strategy for interfacial engineering in sulfide‐based ASSBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Chemical Engineering, Hanyang University, Ansan, 15588, South Korea.
- Battery Material TU, Samsung Advanced Institute of Technology (SAIT), Samsung Electronics Co., Ltd., Suwon, 16678, South Korea.
- Nanocamp Inc., Chungju, 27315, South Korea.
- ALPES Co., Ltd., Ansan, 15588, South Korea.
ORCID-Profile: Kyu Moon Kwon, Tae Joo Park
Förderung
- Nano & Material Technology Development Program
- National R&D Program
- National Research Foundation of Korea
- Ministry of Science and ICT
- Ministry of Science and ICT, South Korea
Zitieren
APA
Kwon, K. M., Kim, D. H., Kwon, H. Y., Park, J., Kim, K. H., Park, H. Y., Kang, H. R., & Park, T. J. (2026). Composition‐Controlled Cathode Protective Layer via Powder‐Atomic Layer Deposition for All‐Solid‐State Batteries. Advanced Science, 13(4). https://doi.org/10.1002/advs.202514583
Vancouver
Kwon KM, Kim DH, Kwon HY, Park J, Kim KH, Park HY, et al. Composition‐Controlled Cathode Protective Layer via Powder‐Atomic Layer Deposition for All‐Solid‐State Batteries. Advanced Science. 2026;13(4). doi:10.1002/advs.202514583
BibTeX
@article{Kwon2026,
author = {Kwon, Kyu Moon and Kim, Dae Ho and Kwon, Ha Yeon and Park, Joungwon and Kim, Kyoung Hwan and Park, Hwi-Yeol and Kang, Hyo Rang and Park, Tae Joo},
title = {Composition‐Controlled Cathode Protective Layer via Powder‐Atomic Layer Deposition for All‐Solid‐State Batteries},
journal = {Advanced Science},
year = {2026},
volume = {13},
number = {4},
doi = {10.1002/advs.202514583}
}
EUVIMED