EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low‐Temperature, Sustainable Manufacturing of Printed OTFT Backplanes for Electrophoretic and OLED Displays

Yasunori Takeda iD, Miho Abiko, Kaori Watanabe, Ryoko Horie, Yasutaka Nakamura, Junghwi Lee, Shohei Yumino, Shinya Oku, Tomohito Sekine, Makoto Mizukami iD

Advanced Science · 2026-01 · 13 (2)

DOI: 10.1002/advs.202514091 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 30.09.2025. Verfasst von Yasunori Takeda und 9 weiteren Autor:innen. Beteiligte Einrichtung: Innovation Center for Organic Electronics, Yamagata University, 1-808-48, Arcadia, Yonezawa, Yamagata, 992-0119, Japan. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yamagata University, Tosoh Corporation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Printed electronics have garnered significant attention for developing lightweight, cost‐effective, and environmentally friendly systems, driving significant advancements in the realm of sustainable electronics. This study introduces a printed active‐matrix organic thin‐film transistor (OTFT) backplane, fabricated under ambient conditions using low‐temperature printing and solution‐based processes. All electrode layers—including gate, source/drain, and pixel electrodes—are patterned through reverse‐offset printing (ROP), achieving high‐resolution multilayer integration with minimum line widths of 10 µm. The resulting OTFTs demonstrate robust performance in ambient air, achieving a carrier mobility of 1.12 cm 2 Vs −1 and on/off ratios exceeding 10⁸. The printed backplane is integrated with an electrophoretic display panel, enabling stable black‐and‐white image rendering through pixel‐level addressing. The same printing technology is employed to fabricate and drive an organic light‐emitting diode (OLED) display, utilizing white OLEDs with laminated color filters. X‐ray photoelectron spectroscopy validates that residual polydimethylsiloxane (PDMS) contamination from the ROP process can be eliminated through IPA rinsing, ensuring clean electrode surfaces. The fabrication process is conducted at temperatures exceeding 160 °C without vacuum equipment, significantly reducing energy consumption and material waste. This environmentally sustainable approach can be employed to develop future flexible and disposable electronics. The versatility of printed backplanes demonstrated here highlights their potential to drive next‐generation, environmentally friendly display technologies.

Schlagwörter

Stichwörter der Autor:innen

active‐matrix backplaneelectrophoretic displaylow‐temperature processorganic thin‐film transistorsprinted electronics

Autor:innen und Institutionen

  • Innovation Center for Organic Electronics, Yamagata University, 1-808-48, Arcadia, Yonezawa, Yamagata, 992-0119, Japan.
  • Advanced Materials Research Laboratory, Tosoh Corporation, 2743-1, Hayakawa, Ayase, Kanagawa, 252-1123, Japan.
  • Graduate School of Organic Materials Science, Yamagata University, 4-3-16, Jonan, Yonezawa, Yamagata, 992-8510, Japan.
  • Research Center for Organic Electronics (ROEL), Yamagata University, 4-3-16, Jonan, Yonezawa, Yamagata, 992-8510, Japan.

ORCID-Profile: Yasunori Takeda, Makoto Mizukami

Förderung

  • Yamagata University
  • Tosoh Corporation

Zitieren

APA

Takeda, Y., Abiko, M., Watanabe, K., Horie, R., Nakamura, Y., Lee, J., Yumino, S., Oku, S., Sekine, T., & Mizukami, M. (2026). Low‐Temperature, Sustainable Manufacturing of Printed OTFT Backplanes for Electrophoretic and OLED Displays. Advanced Science, 13(2). https://doi.org/10.1002/advs.202514091

Vancouver

Takeda Y, Abiko M, Watanabe K, Horie R, Nakamura Y, Lee J, et al. Low‐Temperature, Sustainable Manufacturing of Printed OTFT Backplanes for Electrophoretic and OLED Displays. Advanced Science. 2026;13(2). doi:10.1002/advs.202514091

BibTeX
@article{Takeda2026,
  author = {Takeda, Yasunori and Abiko, Miho and Watanabe, Kaori and Horie, Ryoko and Nakamura, Yasutaka and Lee, Junghwi and Yumino, Shohei and Oku, Shinya and Sekine, Tomohito and Mizukami, Makoto},
  title = {Low‐Temperature, Sustainable Manufacturing of Printed OTFT Backplanes for Electrophoretic and OLED Displays},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {2},
  doi = {10.1002/advs.202514091}
}
Kostenlos starten →