3D Membrane Microstructures for Increased Efficiency in Blood‐Gas Transfer
Advanced Science · 2025
DOI: 10.1002/advs.202512302 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, 2025. Verfasst von Kai P Barbian und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Cardiovascular Engineering, Institute of Applied Medical Engineering, Medical Faculty, RWTH Aachen University, Forckenbeckstr. 55, 5207…. Hauptthemen laut MEDLINE: Extracorporeal Membrane Oxygenation, Membranes, Artificial, Oxygenators, Membrane. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Medizinische Fakultät, RWTH Aachen University, START, Deutsche Forschungsgemeinschaft (DFG).
Abstract (Originalsprache)
Treating severe lung diseases with extracorporeal membrane oxygenation (ECMO) is often accompanied by serious complications, restricting applicability and adversely affecting outcomes. Membrane oxygenators, based on hollow fiber membranes (HFM), are a central ECMO component. Here, current designs are reaching their limits regarding hemocompatibility and gas transfer efficiency. Three‐dimensional structures, based on triply periodic minimal surfaces, can provide superior hemodynamics. However, previous 3D membrane structures don't provide the required channel scale and gas transfer performance. In this study, we have fabricated 3D microstructures and tested them in vitro against state‐of‐the‐art HFM. The 3D structure provided gas transfer coefficients within 50 and 45% of the HFM's value for oxygen and carbon dioxide, respectively. Specific pressure drops within the 3D structure are more than ten times lower than in the HFM. Combining these aspects, the 3D structure showed 51and 33% higher mass‐transfer efficiency for oxygen and carbon dioxide, respectively. By further reducing channel scale, the 3D structure can help to miniaturize oxygenators while maintaining efficiency. Thereby, the invasiveness of ECMO could be reduced to improve outcomes. Our approach for the design and manufacturing of 3D membrane microstructures can be transferred to other mass‐transfer applications like bioreactors or microfluidic cell culture.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Cardiovascular Engineering, Institute of Applied Medical Engineering, Medical Faculty, RWTH Aachen University, Forckenbeckstr. 55, 52074, Aachen, Germany.
- Chemical Process Engineering (AVT.CVT), RWTH Aachen University, Forckenbeckstr. 51, 52074, Aachen, Germany.
- Process Engineering of Electrochemical Systems, Technical University of Darmstadt, Otto-Berndt-Str. 2, 64287, Darmstadt, Germany.
- DWI, Leibniz-Institute for Interactive Materials, Forckenbeckstr. 50, 52074, Aachen, Germany.
- Department for Cardiothoracic, Transplantation and Vascular Surgery, Hannover Medical School, Carl-Neuberg-Straße 1, 30625, Hannover, Germany.
- Implant Research and Development (NIFE), Lower Saxony Center for Biomedical Engineering, Stadtfelddamm 34, 30625, Hannover, Germany.
ORCID-Profile: Kai P Barbian
Förderung
- Medizinische Fakultät, RWTH Aachen University, START
- Deutsche Forschungsgemeinschaft (DFG)
Zitieren
APA
Barbian, K. P., Neuhaus, F., Hirschwald, L. T., Linkhorst, J., Wessling, M., Wiegmann, B., Focke, J. M., Steinseifer, U., Neidlin, M., & Jansen, S. V. (2025). 3D Membrane Microstructures for Increased Efficiency in Blood‐Gas Transfer. Advanced Science. https://doi.org/10.1002/advs.202512302
Vancouver
Barbian KP, Neuhaus F, Hirschwald LT, Linkhorst J, Wessling M, Wiegmann B, et al. 3D Membrane Microstructures for Increased Efficiency in Blood‐Gas Transfer. Advanced Science. 2025. doi:10.1002/advs.202512302
BibTeX
@article{Barbian2025,
author = {Barbian, Kai P and Neuhaus, F and Hirschwald, L T and Linkhorst, J and Wessling, M and Wiegmann, B and Focke, J M and Steinseifer, U and Neidlin, M and Jansen, S V},
title = {3D Membrane Microstructures for Increased Efficiency in Blood‐Gas Transfer},
journal = {Advanced Science},
year = {2025},
doi = {10.1002/advs.202512302}
}
EUVIMED