EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Subvoxel Control of Fiber Orientation via Multidirectional Shearing in 3D Printing

Berin Šeta, Marco Brander, Michael Sandberg, Md Tusher Mollah, Vipin Kumar, Jon Spangenberg

Advanced Science · 2026-02 · 13 (9)

DOI: 10.1002/advs.202511008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 29.10.2025. Verfasst von Berin Šeta und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil and Mechanical Engineering, Technical University of Denmark, 2800, Kongens Lyngby, Denmark. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovationsfonden, Danmarks Frie Forskningsfond, Advanced Manufacturing Office.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Anisotropy, the characteristic of materials exhibiting different properties based on their direction, is widespread in nature. Conventional manufacturing techniques often fall short in recreating such complex anisotropy. While 3D printing allows for precise fiber deposition in anisotropic composites, previous studies have only achieved bulk reorientation of fibers at the voxel level in two dimensions. This limits the replication of localized 3D anisotropies found in natural materials. To address this, a novel 3D printing technique is presented that enables subvoxel control of fiber orientation in all three directions using multidirectional shearing via nozzle rotation and inclination. The fiber orientation control in these experimental tests is driven by a numerical model, enabling a fully digital approach to program microstructures within a strand. This programmability is demonstrated through mechanical and thermal tests, illustrating a localized and controllable response to external stimuli. Achieving such complex anisotropy holds potential across several fields, including wearables and biomedical implants, lightweight composite structures, and energy storage technologies such as batteries and supercapacitors.

Schlagwörter

Stichwörter der Autor:innen

3D printinganisotropyfiber orientationsubvoxel control

Autor:innen und Institutionen

  • Department of Civil and Mechanical Engineering, Technical University of Denmark, 2800, Kongens Lyngby, Denmark.
  • Department of Mechanical and Production Engineering, Aarhus University, 8200, Aarhus N, Denmark.
  • Manufacturing Science Division, Oak Ridge National Laboratory, TN, 37932, USA.

Förderung

  • Innovationsfonden
  • Danmarks Frie Forskningsfond
  • Advanced Manufacturing Office

Zitieren

APA

Šeta, B., Brander, M., Sandberg, M., Mollah, M. T., Kumar, V., & Spangenberg, J. (2026). Subvoxel Control of Fiber Orientation via Multidirectional Shearing in 3D Printing. Advanced Science, 13(9). https://doi.org/10.1002/advs.202511008

Vancouver

Šeta B, Brander M, Sandberg M, Mollah MT, Kumar V, Spangenberg J. Subvoxel Control of Fiber Orientation via Multidirectional Shearing in 3D Printing. Advanced Science. 2026;13(9). doi:10.1002/advs.202511008

BibTeX
@article{eta2026,
  author = {Šeta, Berin and Brander, Marco and Sandberg, Michael and Mollah, Md Tusher and Kumar, Vipin and Spangenberg, Jon},
  title = {Subvoxel Control of Fiber Orientation via Multidirectional Shearing in 3D Printing},
  journal = {Advanced Science},
  year = {2026},
  volume = {13},
  number = {9},
  doi = {10.1002/advs.202511008}
}
Kostenlos starten →