EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Active Component Design of Amorphous SnP x /SnS x and Interfacial Bonding Engineering in N/P/S‐Doped Hard Carbon for High‐Rate Sodium‐Ion Hybrid Capacitors

Ziyang Jia, Yichen Duan, Xi Chen, Zewen Sun, Lili Liu, Lijun Fu, Yuhui Chen, Faxing Wang, Tao Wang, Yuping Wu iD

Advanced Science · 2025-08 · 12 (32)

DOI: 10.1002/advs.202506532 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 28.05.2025. Verfasst von Ziyang Jia und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy Science and Engineering, Nanjing Tech University, Nanjing, Jiangsu, 211816, China. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Carbon Emission Peak and Neutrality of Jiangsu Province, NSFC Key Project, Project on National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sodium‐ion hybrid capacitors (SIC)face critical challenges from the kinetic mismatch and cycling life imbalance between battery‐type anodes and capacitive cathodes. A slope‐dominant N/P/S‐doped hard carbon anode (Sn0.1@NSPC) with nearly plateau‐free sloping charge–discharge curves, embedded with amorphous SnP x /SnS x composites, is developed. This unique design delivers a high reversible capacity of 412.8 mAh g⁻¹ at 0.05 A g⁻¹ while retaining 180.7 mAh g⁻¹ at 10 A g⁻¹, coupled with 90% capacity retention over 10 000 cycles. The amorphous SnP x /SnS x enables isotropic Na⁺ diffusion and volume expansion suppression, while interfacial Sn─P/Sn─S bonding activates the redox potential of P/S for sodium storage through reversible Na₃P/Na₂S formation. Density functional theory calculations demonstrate that Sn doping enhances electronic states near the Fermi level and reduces sodium‐ion diffusion barriers, improving conductivity and ion transport. Pseudocapacitive‐dominated kinetics with reduced charge transfer resistance are achieved, synergizing with alloying/conversion reactions. In SIC paired with activated carbon, the system exhibits an energy density of 360 Wh kg⁻¹ (anode‐mass‐based), a power density of 38 kW kg⁻¹, and 91% capacity retention after 3000 cycles. This work establishes a universal heterostructure design via amorphous engineering and interfacial coupling, addressing trade‐offs between high capacity, rapid kinetics, and long‐term cycling stability in advanced SIC.

Schlagwörter

Stichwörter der Autor:innen

amorphous engineeringanodehard carbonhybrid capacitorsodium ion

Autor:innen und Institutionen

  • School of Energy Science and Engineering, Nanjing Tech University, Nanjing, Jiangsu, 211816, China.
  • Confucius Energy Storage Lab, School of Energy and Environment & Z Energy Storage Center, Southeast University, Nanjing, 211189, China.

ORCID-Profile: Yuping Wu

Förderung

  • Carbon Emission Peak and Neutrality of Jiangsu Province
  • NSFC Key Project
  • Project on National Key R&D Program of China

Zitieren

APA

Jia, Z., Duan, Y., Chen, X., Sun, Z., Liu, L., Fu, L., Chen, Y., Wang, F., Wang, T., & Wu, Y. (2025). Active Component Design of Amorphous SnP x /SnS x and Interfacial Bonding Engineering in N/P/S‐Doped Hard Carbon for High‐Rate Sodium‐Ion Hybrid Capacitors. Advanced Science, 12(32). https://doi.org/10.1002/advs.202506532

Vancouver

Jia Z, Duan Y, Chen X, Sun Z, Liu L, Fu L, et al. Active Component Design of Amorphous SnP x /SnS x and Interfacial Bonding Engineering in N/P/S‐Doped Hard Carbon for High‐Rate Sodium‐Ion Hybrid Capacitors. Advanced Science. 2025;12(32). doi:10.1002/advs.202506532

BibTeX
@article{Jia2025,
  author = {Jia, Ziyang and Duan, Yichen and Chen, Xi and Sun, Zewen and Liu, Lili and Fu, Lijun and Chen, Yuhui and Wang, Faxing and Wang, Tao and Wu, Yuping},
  title = {Active Component Design of Amorphous SnP x /SnS x and Interfacial Bonding Engineering in N/P/S‐Doped Hard Carbon for High‐Rate Sodium‐Ion Hybrid Capacitors},
  journal = {Advanced Science},
  year = {2025},
  volume = {12},
  number = {32},
  doi = {10.1002/advs.202506532}
}
Kostenlos starten →