EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Expansion Force‐Based Adaptive Multistage Constant Current Fast Charging with Lithium Plating Detection for Lithium‐Ion Batteries

Yudong Shen, Xueyuan Wang iD, Yuguang Li, Zhichao Zhang, Zhengde Tao, Yanan Hou, Xuezhe Wei, Haifeng Dai iD

Advanced Science · 2025-08 · 12 (30)

DOI: 10.1002/advs.202504580 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 19.05.2025. Verfasst von Yudong Shen und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Automotive Studies, Tongji University, Shanghai, 201804, China. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation of China, Zhejiang Key Laboratory of Safety Engineering and Technology, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The multistage constant current (MCC) charging protocol for lithium‐ion batteries is commonly used to balance lithium plating and charging time. Traditional methods depend on a pre‐defined charging map without considering the feedback of lithium plating and subsequent self‐regulation of the charging rate. To tackle this problem, an adaptive MCC charging method is proposed, which is based on expansion force feedback to detect lithium plating. By integrating experiments with simulations, the results indicate that when lithium plating occurs, the force experiences an abnormal, accelerated increase. If the charging rate is reduced until lithium plating ceases, the force decreases. Correspondingly, three thresholds, V1, V2, and V3, in the derivative of force (dF/dSOC), are identified. Utilizing these thresholds, the charging rate can be self‐regulated. The results demonstrate that charging speed can be increased by 50% without causing irreversible lithium plating. The proposed method holds great promise for integration into intelligent battery management systems, thereby enhancing the performance of MCC fast charging.

Schlagwörter

Stichwörter der Autor:innen

charging rate self‐regulationexpansion forcefast charginglithium plating detectionlithium‐ion battery

Autor:innen und Institutionen

  • School of Automotive Studies, Tongji University, Shanghai, 201804, China.
  • Tianmu Lake Institute of Advanced Energy Storage Technologies Co., Ltd., Liyang, 213300, China.

ORCID-Profile: Xueyuan Wang, Haifeng Dai

Förderung

  • National Science Foundation of China
  • Zhejiang Key Laboratory of Safety Engineering and Technology
  • National Natural Science Foundation of China

Zitieren

APA

Shen, Y., Wang, X., Li, Y., Zhang, Z., Tao, Z., Hou, Y., Wei, X., & Dai, H. (2025). Expansion Force‐Based Adaptive Multistage Constant Current Fast Charging with Lithium Plating Detection for Lithium‐Ion Batteries. Advanced Science, 12(30). https://doi.org/10.1002/advs.202504580

Vancouver

Shen Y, Wang X, Li Y, Zhang Z, Tao Z, Hou Y, et al. Expansion Force‐Based Adaptive Multistage Constant Current Fast Charging with Lithium Plating Detection for Lithium‐Ion Batteries. Advanced Science. 2025;12(30). doi:10.1002/advs.202504580

BibTeX
@article{Shen2025,
  author = {Shen, Yudong and Wang, Xueyuan and Li, Yuguang and Zhang, Zhichao and Tao, Zhengde and Hou, Yanan and Wei, Xuezhe and Dai, Haifeng},
  title = {Expansion Force‐Based Adaptive Multistage Constant Current Fast Charging with Lithium Plating Detection for Lithium‐Ion Batteries},
  journal = {Advanced Science},
  year = {2025},
  volume = {12},
  number = {30},
  doi = {10.1002/advs.202504580}
}
Kostenlos starten →