EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Realizing High Performance in Flexible Mg 3 Sb 2− x Bi x Thin‐Film Thermoelectrics

Boxuan Hu, Xiao-Lei Shi, Tianyi Cao, Min Zhang, Wenyi Chen, Siqi Liu, Meng Li, Weidi Liu, Zhi-Gang Chen iD

Advanced Science · 2025-05 · 12 (19)

DOI: 10.1002/advs.202502683 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 20.03.2025. Verfasst von Boxuan Hu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Physics, ARC Research Hub in Zero-emission Power Generation for Carbon Neutrality, and Centre for Materials Science, Queensla…. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council, HBIS-UQ Innovation Centre for Sustainable Steel project, QUT Capacity Building Professor Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As advancements in Mg‐based thermoelectric materials continue, increasing attention is directed toward enhancing the thermoelectric performance of Mg 3 Sb 2 and its integration into thermoelectric devices. However, research on Mg 3 Sb 2 thin films and their application in flexible devices remains limited, leaving ample room for improvements in fabrication techniques and thermoelectric properties. To address these gaps, this study employs magnetron sputtering combined with ex‐situ annealing to dope Bi into Mg 3 Sb 2 thin films, partially substituting Sb. This approach enhances the near‐room‐temperature performance and plasticity, yielding high‐performance Mg 3 Sb 2− x Bi x thermoelectric thin films. The films achieve a power factor of 3.77 µW cm −1 K −2 at 500 K, the highest value reported for p‐type Mg 3 Sb 2 thin films to date. Comprehensive characterization demonstrates precise thickness control, strong adhesion to various substrates, and excellent flexibility, with performance degradation of less than 12% after 1000 bending cycles at a radius of 5 mm. Additionally, a flexible thermoelectric device is constructed using p‐type Mg 3 Sb 1.1 Bi 0.9 and n‐type Ag 2 Se legs, achieving an output power of 9.96 nW and a power density of 77.38 µW cm −2 under a temperature difference of 10 K. These findings underscore the potential of these devices for practical applications in wearable electronics.

Schlagwörter

Stichwörter der Autor:innen

Mg3Sb2devicefilmflexiblethermoelectric

Autor:innen und Institutionen

  • School of Chemistry and Physics, ARC Research Hub in Zero-emission Power Generation for Carbon Neutrality, and Centre for Materials Science, Queensland University of Technology, Brisbane, QLD, 4000, Australia.

ORCID-Profile: Zhi-Gang Chen

Förderung

  • Australian Research Council
  • HBIS-UQ Innovation Centre for Sustainable Steel project
  • QUT Capacity Building Professor Program

Zitieren

APA

Hu, B., Shi, X. L., Cao, T., Zhang, M., Chen, W., Liu, S., Li, M., Liu, W., & Chen, Z. G. (2025). Realizing High Performance in Flexible Mg 3 Sb 2− x Bi x Thin‐Film Thermoelectrics. Advanced Science, 12(19). https://doi.org/10.1002/advs.202502683

Vancouver

Hu B, Shi XL, Cao T, Zhang M, Chen W, Liu S, et al. Realizing High Performance in Flexible Mg 3 Sb 2− x Bi x Thin‐Film Thermoelectrics. Advanced Science. 2025;12(19). doi:10.1002/advs.202502683

BibTeX
@article{Hu2025,
  author = {Hu, Boxuan and Shi, Xiao-Lei and Cao, Tianyi and Zhang, Min and Chen, Wenyi and Liu, Siqi and Li, Meng and Liu, Weidi and Chen, Zhi-Gang},
  title = {Realizing High Performance in Flexible Mg 3 Sb 2− x Bi x Thin‐Film Thermoelectrics},
  journal = {Advanced Science},
  year = {2025},
  volume = {12},
  number = {19},
  doi = {10.1002/advs.202502683}
}
Kostenlos starten →