EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Unveiling Surface Species Formed on Ni‐Fe Spinel Oxides During the Oxygen Evolution Reaction at the Atomic Scale

Weikai Xiang, Sheila Hernandez iD, Pouya Hosseini, Fan Bai, Ulrich Hagemann, Markus Heidelmann, Tong Li iD

Advanced Science · 2025-07 · 12 (25)

DOI: 10.1002/advs.202501967 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 31.03.2025. Verfasst von Weikai Xiang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Atomic-scale Characterisation, Ruhr-Universität Bochum, Universitätsstraße 150, 44801, Bochum, Germany. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Optimizing electrocatalyst performance requires an atomic‐scale understanding of surface state changes and how those changes affect activity and stability during the reaction. This is particularly important for the oxygen evolution reaction (OER) since the electrocatalytically active surfaces undergo substantial reconstruction and transformation. Herein, a multimodal method is employed that combines X‐ray photoemission spectroscopy, transmission electron microscopy, atom probe tomography, operando surface‐enhanced Raman spectroscopy with electrochemical measurements to examine the surface species formed on NiFe 2 O 4 , P‐doped NiFe 2 O 4 and Ni 1.5 Fe 1.5 O 4 upon OER cycling. The activated NiFe 2 O 4 and P‐doped NiFe 2 O 4 exhibit a significantly lower Tafel slope (≈40 mV dec −1 ) than Ni 1.5 Fe 1.5 O 4 (≈90 mV dec −1 ), although oxyhydroxides are grown on all three Ni‐Fe spinels during OER. This is likely attributed to the formation of a ≈1 nm highly defective layer with a higher oxygen concentration on the activated NiFe 2 O 4 and P‐doped NiFe 2 O 4 nanoparticle surfaces (than that in bulk), which improves the charge transfer kinetics toward OER. Such surface species are not formed on Ni 1.5 Fe 1.5 O 4 . Overall, this study provides a mechanistic understanding of the role of Fe, P, and Ni in forming active oxygen species in the Ni‐based spinels toward OER.

Schlagwörter

Stichwörter der Autor:innen

OERRaman spectroscopyactive speciesatom probe tomographyoxyhydroxideswater splitting

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, Atomic-scale Characterisation, Ruhr-Universität Bochum, Universitätsstraße 150, 44801, Bochum, Germany.
  • Faculty of Chemistry and Biochemistry, Analytical Chemistry II, Ruhr-Universität Bochum, Universitätsstraße 150, 44801, Bochum, Germany.
  • Max-Planck-Institut für Nachhaltige Materialien GmbH, Max-Planck-Straße 1, 40237, Düsseldorf, Germany.
  • Interdisciplinary Center for Analytics on the Nanoscale (ICAN) and Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen, Carl-Benz-Straße 199, 47057, Duisburg, Germany.

ORCID-Profile: Sheila Hernandez, Tong Li

Förderung

  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Xiang, W., Hernandez, S., Hosseini, P., Bai, F., Hagemann, U., Heidelmann, M., & Li, T. (2025). Unveiling Surface Species Formed on Ni‐Fe Spinel Oxides During the Oxygen Evolution Reaction at the Atomic Scale. Advanced Science, 12(25). https://doi.org/10.1002/advs.202501967

Vancouver

Xiang W, Hernandez S, Hosseini P, Bai F, Hagemann U, Heidelmann M, et al. Unveiling Surface Species Formed on Ni‐Fe Spinel Oxides During the Oxygen Evolution Reaction at the Atomic Scale. Advanced Science. 2025;12(25). doi:10.1002/advs.202501967

BibTeX
@article{Xiang2025,
  author = {Xiang, Weikai and Hernandez, Sheila and Hosseini, Pouya and Bai, Fan and Hagemann, Ulrich and Heidelmann, Markus and Li, Tong},
  title = {Unveiling Surface Species Formed on Ni‐Fe Spinel Oxides During the Oxygen Evolution Reaction at the Atomic Scale},
  journal = {Advanced Science},
  year = {2025},
  volume = {12},
  number = {25},
  doi = {10.1002/advs.202501967}
}
Kostenlos starten →