A Universal Toughening and Energy‐Dissipating Strategy for Impact‐Resistant 3D‐Printed Composites
Advanced Science · 2025-07 · 12 (25)
DOI: 10.1002/advs.202501450 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 09.04.2025. Verfasst von Xiang Hong und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai, 200092, P. R. China. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program Key Special Projects of China, Zhi yuan Laboratory.
Abstract (Originalsprache)
3D‐printed polymer‐based composites are promising for various engineering applications due to high strength‐to‐weight ratios and design flexibility. However, conventional matrix materials, such as polylactic acid and epoxy resin, often exhibit brittleness and limited impact resistance (< 10 kJ m − 2 ). Herein, a universal strategy is reported for enhancing the ductility and impact energy absorption of 3D‐printed composites by leveraging the dynamic crosslinking of B─O dative bonds. To validate its effectiveness, a smart composite (PLA/SSG) comprising shear‐stiffening gel fillers embedded in a polylactic acid matrix is designed and its rate‐dependent mechanical adjustability along with 3D printability is evaluated. The resulting composite shows significant improvements in impact resistance, ductility, and strength‐ductility balance. Specifically, the multiple crack and localized plastic yielding of polylactic acid matrix induced by shear‐stiffening gel fillers enables PLA/SSG with a 40‐times increase in ductility; the “soft‐hard” phase transition of shear‐stiffening gel induced by B─O bonds endows PLA/SSG with a 330% improvement in impact energy absorption. This B─O bonds‐inspired strategy provides a universal approach for printing smart impact‐resistant composites and structures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai, 200092, P. R. China.
- Beijing Institute of Technology Chongqing Innovation Center, Chongqing, 401120, P. R. China.
- State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing, 100081, P. R. China.
- Key Laboratory of AI-aided Airworthiness of Civil Aircraft Structures, Civil Aviation Administration, Tongji University, Shanghai, 200092, P. R. China.
- Shanghai Institute of Aircraft Mechanics and Control, Shanghai, 20092, P. R. China.
ORCID-Profile: Yan Li
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program Key Special Projects of China
- Zhi yuan Laboratory
Zitieren
APA
Hong, X., Wang, P., Ma, Y., Yang, W., Zhang, J., Zhang, Z., & Li, Y. (2025). A Universal Toughening and Energy‐Dissipating Strategy for Impact‐Resistant 3D‐Printed Composites. Advanced Science, 12(25). https://doi.org/10.1002/advs.202501450
Vancouver
Hong X, Wang P, Ma Y, Yang W, Zhang J, Zhang Z, et al. A Universal Toughening and Energy‐Dissipating Strategy for Impact‐Resistant 3D‐Printed Composites. Advanced Science. 2025;12(25). doi:10.1002/advs.202501450
BibTeX
@article{Hong2025,
author = {Hong, Xiang and Wang, Peng and Ma, Yu and Yang, Weidong and Zhang, Junming and Zhang, Zhongsen and Li, Yan},
title = {A Universal Toughening and Energy‐Dissipating Strategy for Impact‐Resistant 3D‐Printed Composites},
journal = {Advanced Science},
year = {2025},
volume = {12},
number = {25},
doi = {10.1002/advs.202501450}
}
EUVIMED