EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Imaging‐Guided Microscale Photothermal Stereolithography Bioprinting

Jingyu Sun, Tianqi Fang, Yuze Zhang, Jue Wang, Huan Han, Tsengming Chou, Junfeng Liang, Dilhan M Kalyon, Hongjun Wang, Shang Wang iD

Advanced Science · 2025

DOI: 10.1002/advs.202500640 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, 2025. Verfasst von Jingyu Sun und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Stevens Institute of Technology, Hoboken, NJ, 07030, USA. Hauptthemen laut MEDLINE: Bioprinting, Tissue Engineering, Stereolithography. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIGMS NIH HHS, NIH HHS, Stevens Institute of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Stereolithography bioprinting relies heavily on costly photoinitiators for polymerization, limiting its potential for further technical advancement to meet growing needs in tissue engineering and regenerative medicine. Thermal initiators, in contrast, are low cost, and rapid growth of the photothermal conversion field offers a wide range of materials and tools to convert light into heat. However, high‐resolution photothermal stereolithography bioprinting remains unattainable due to the difficulty of confining heat in an aqueous environment. Here, this challenge has been fully addressed by establishing imaging‐guided microscale photothermal stereolithography bioprinting (ImPSB). This technique is achieved through building a novel imaging‐guided stereolithography system that provides depth‐resolved visualization of the printing dynamics, creating a unique photothermal initiator in the second near‐infrared window, and developing a new bioink by seeing and controlling the photothermal gelation process. ImPSB achieves a printing resolution of ≈47 µm and generates smooth lines of arbitrarily designed shapes with a cross‐sectional diameter as small as ≈104 µm, representing an unprecedented scale from photothermal aqueous stereolithography. Its cellular biocompatibility in printing both bioscaffold and cell‐laden hydrogel is demonstrated, and its feasibility of transdermal printing is also shown. This work sets a new path for high‐resolution stereolithography bioprinting where the vast photothermal resources can be utilized.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

BioprintingTissue EngineeringStereolithographyPrinting, Three-DimensionalHumansAnimals

Stichwörter der Autor:innen

NIR‐II photothermal initiatorbioprintingimaging‐guided printingoptical coherence tomographystereolithography

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Stevens Institute of Technology, Hoboken, NJ, 07030, USA.
  • Department of Chemical Engineering and Materials Science, Stevens Institute of Technology, Hoboken, NJ, 07030, USA.
  • Department of Chemistry and Chemical Biology, Stevens Institute of Technology, Hoboken, NJ, 07030, USA.

ORCID-Profile: Shang Wang

Förderung

  • NIGMS NIH HHS
  • NIH HHS
  • Stevens Institute of Technology
  • National Institutes of Health

Zitieren

APA

Sun, J., Fang, T., Zhang, Y., Wang, J., Han, H., Chou, T., Liang, J., Kalyon, D. M., Wang, H., & Wang, S. (2025). Imaging‐Guided Microscale Photothermal Stereolithography Bioprinting. Advanced Science. https://doi.org/10.1002/advs.202500640

Vancouver

Sun J, Fang T, Zhang Y, Wang J, Han H, Chou T, et al. Imaging‐Guided Microscale Photothermal Stereolithography Bioprinting. Advanced Science. 2025. doi:10.1002/advs.202500640

BibTeX
@article{Sun2025,
  author = {Sun, Jingyu and Fang, Tianqi and Zhang, Yuze and Wang, Jue and Han, Huan and Chou, Tsengming and Liang, Junfeng and Kalyon, Dilhan M and Wang, Hongjun and Wang, Shang},
  title = {Imaging‐Guided Microscale Photothermal Stereolithography Bioprinting},
  journal = {Advanced Science},
  year = {2025},
  doi = {10.1002/advs.202500640}
}
Kostenlos starten →