PTAA‐Based Perovskite Photovoltaics Catching up: Ionic Liquid Engineering‐Assisted Crystallization Through Sequential Deposition
Advanced Science · 2025-04 · 12 (15)
DOI: 10.1002/advs.202414515 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 20.02.2025. Verfasst von Yongjun Li und 16 weiteren Autor:innen. Beteiligte Einrichtung: Hoffmann Institute of Advanced Materials, Shenzhen Polytechnic University, 7098 Liuxian Boulevard, Shenzhen, 518055, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nazarbayev University, The Scientific and Technical Innovation Council of Shenzhen, Department of Education of Guangdong Province.
Abstract (Originalsprache)
PTAA as a widely studied polymeric hole transporting material, has garnered significant attention due to its outstanding thermal and chemical stability. However, the performance of PTAA‐based p‐i‐n devices is shown to lag behind counterpart utilizing oxides or SAMs. In this study, the ionic liquid, 1‐ethyl‐3‐methylimidazolium formate (EMIMCOOH), is innovatively introduced into the lead iodide (PbI 2 ) precursor solution, resulting in a more pronounced mesoporous PbI 2 film with expended pore‐size and denser pores. This enhancement is attributed to the coordination bond between the ─C═O group in EMIMCOOH and Pb 2+ . This intensified mesoporous morphology not only facilities the reaction between PbI 2 and the organic layer, but also promotes the PbI 2 conversion into perovskite material. Importantly, the incorporation of EMIMCOOH slows down the perovskite conversion process, increasing perovskite domain size and suppressed Pb 0 trap density, resulting in a uniform perovskite layer with enhanced charge transport properties, as evidenced by the conducting atomic force microscope (c‐AFM) results. As a result, the incorporation of EMIMCOOH yields a power conversion efficiency (PCE) of 24.10% and a high fill factor exceeding 85%. Notably, the PCE of the EMIMCOOH‐modified device can still maintain 86% of the initial value after 1500 h at 25 °C in an N 2 atmosphere.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hoffmann Institute of Advanced Materials, Shenzhen Polytechnic University, 7098 Liuxian Boulevard, Shenzhen, 518055, China.
- Jiangsu Provincial Engineering Research Center of Low-Dimensional Physics and New Energy & School of Science, Key Laboratory for Organic Electronics and Information Displays & Institute of Advanced Materials (IAM), Jian…
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, 430070, China.
- Medical Intelligence and Innovation Academy, Southern University of Science and Technology Hospital, Shenzhen, 518055, China.
- College of Chemistry, Nankai University, Tianjin, 300071, China.
- Department of Applied Physics, The Hong Kong Polytechnic University, Kowloon, Hong Kong.
Förderung
- Nazarbayev University
- The Scientific and Technical Innovation Council of Shenzhen
- Department of Education of Guangdong Province
- Guangdong Basic and Applied Basic Research Foundation
- University-Enterprise Joint Research and Development Center - Advanced Carbon Materials R&D Center
- Southern University of Science and Technology Hospital
- Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications
- Natural Science Foundation of Jiangsu Higher Education Institutions of China
Zitieren
APA
Li, Y., Wang, F., Li, Q., Tang, B., Sun, Y., Wang, T., Liang, X., Ma, J., Zhou, X., Zhang, F., Li, X., Tong, Y., Hu, R., Yuan, M., Wu, T., Ng, A., & Hu, H. (2025). PTAA‐Based Perovskite Photovoltaics Catching up: Ionic Liquid Engineering‐Assisted Crystallization Through Sequential Deposition. Advanced Science, 12(15). https://doi.org/10.1002/advs.202414515
Vancouver
Li Y, Wang F, Li Q, Tang B, Sun Y, Wang T, et al. PTAA‐Based Perovskite Photovoltaics Catching up: Ionic Liquid Engineering‐Assisted Crystallization Through Sequential Deposition. Advanced Science. 2025;12(15). doi:10.1002/advs.202414515
BibTeX
@article{Li2025,
author = {Li, Yongjun and Wang, Fei and Li, Qiannan and Tang, Baolei and Sun, Yonggui and Wang, Taomiao and Liang, Xiao and Ma, Jing and Zhou, Xianfang and Zhang, Fan and Li, Xing'ao and Tong, Yao and Hu, Ruiyuan and Yuan, Mingjian and Wu, Tom and Ng, Annie and Hu, Hanlin},
title = {PTAA‐Based Perovskite Photovoltaics Catching up: Ionic Liquid Engineering‐Assisted Crystallization Through Sequential Deposition},
journal = {Advanced Science},
year = {2025},
volume = {12},
number = {15},
doi = {10.1002/advs.202414515}
}
EUVIMED