EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimizing Biomimetic 3D Disordered Fibrous Network Structures for Lightweight, High‐Strength Materials via Deep Reinforcement Learning

Yunhao Yang, Runnan Bai, Wenli Gao, Leitao Cao, Jing Ren, Zhengzhong Shao, Shengjie Ling iD

Advanced Science · 2025

DOI: 10.1002/advs.202413293 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, 2025. Verfasst von Yunhao Yang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Physical Science and Technology, ShanghaiTech University, 393 Middle Huaxia Road, Shanghai, 201210, China. Hauptthemen laut MEDLINE: Biomimetic Materials, Deep Learning, Biomimetics, Silk. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D disordered fibrous network structures (3D‐DFNS), such as cytoskeletons, collagen matrices, and spider webs, exhibit remarkable material efficiency, lightweight properties, and mechanical adaptability. Despite their widespread in nature, the integration into engineered materials is limited by the lack of study on their complex architectures. This study addresses the challenge by investigating the structure‐property relationships and stability of biomimetic 3D‐DFNS using large datasets generated through procedural modeling, coarse‐grained molecular dynamics simulations, and machine learning. Based on these datasets, a network deep reinforcement learning (N‐DRL) framework is developed to optimize its stability, effectively balancing weight reduction with the maintenance of structural integrity. The results reveal a pronounced correlation between the total fiber length in 3D‐DFNS and its mechanical properties, where longer fibers enhance stress distribution and stability. Additionally, fiber orientation is also considered as a potential factor influencing stress growth values. Furthermore, the N‐DRL model demonstrates superior performance compared to traditional approaches in optimizing network stability while minimizing mass and computational cost. Structural integrity is significantly improved through the addition of triple junctions and the reduction of higher‐order nodes. In summary, this study leverages machine learning to optimize biomimetic 3D‐DFNS, providing novel insights into the design of lightweight, high‐strength materials.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Biomimetic MaterialsDeep LearningBiomimeticsSilkMolecular Dynamics SimulationAnimalsReinforcement Machine Learning

Stichwörter der Autor:innen

biomimeticdeep reinforcement learningmolecular dynamics simulationsnetwork structuresstability optimization

Substanzen

Silk

Autor:innen und Institutionen

  • School of Physical Science and Technology, ShanghaiTech University, 393 Middle Huaxia Road, Shanghai, 201210, China.
  • State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai, 200433, China.
  • State Key Laboratory of Advanced Medical Materials and Devices, ShanghaiTech University, Shanghai, 201210, China.
  • Shanghai Clinical Research and Trial Center, Shanghai, 201210, China.

ORCID-Profile: Shengjie Ling

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yang, Y., Bai, R., Gao, W., Cao, L., Ren, J., Shao, Z., & Ling, S. (2025). Optimizing Biomimetic 3D Disordered Fibrous Network Structures for Lightweight, High‐Strength Materials via Deep Reinforcement Learning. Advanced Science. https://doi.org/10.1002/advs.202413293

Vancouver

Yang Y, Bai R, Gao W, Cao L, Ren J, Shao Z, et al. Optimizing Biomimetic 3D Disordered Fibrous Network Structures for Lightweight, High‐Strength Materials via Deep Reinforcement Learning. Advanced Science. 2025. doi:10.1002/advs.202413293

BibTeX
@article{Yang2025,
  author = {Yang, Yunhao and Bai, Runnan and Gao, Wenli and Cao, Leitao and Ren, Jing and Shao, Zhengzhong and Ling, Shengjie},
  title = {Optimizing Biomimetic 3D Disordered Fibrous Network Structures for Lightweight, High‐Strength Materials via Deep Reinforcement Learning},
  journal = {Advanced Science},
  year = {2025},
  doi = {10.1002/advs.202413293}
}
Kostenlos starten →