In Situ Constructing Robust Interface by Deep Eutectic Polymeric Electrolyte Enables High Performance Lithium Metal Batteries with High‐Loading Cathode
Advanced Science · 2024-12 · 11 (47)
DOI: 10.1002/advs.202411421 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 28.10.2024. Verfasst von Zixuan Fang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, Sichuan, 611731, China. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Sichuan Province, Chengdu Municipal Science and Technology Program.
Abstract (Originalsprache)
The low Li + transport and poor interface have consistently been two major impediments to practical applications of Polyacrylonitrile (PAN)‐based composite solid‐state electrolytes (PCPE). In this work, a polymerizable deep eutectic electrolyte is meticulously designed with high fluidity which consists of Poly (Ethylene Glycol) Diacrylate (PEGDA), Fluoroethylene Carbonate (FEC), Succinonitrile (SN) and dual salts (LiTFSI/LiDFOB) to promote Li + transport and ameliorate the interface of PCPE. Inclusion of PEGDA monomers and FEC alters the crystallinity of SN, enhancing the wettability of thick electrode, and formation of polymeric 3D network from polymerization of PEGDA can anchor SN and suppress the side reactions between SN and lithium metal. Consequently, the modified PCPE exhibit an enhanced conductivity of 4.47 × 10 −4 S cm −1 with Li‐ion transference number of 0.60, and show an excellent lithium stability. LiCoO 2 (LCO)/SP‐PCPE/Li batteries with higher loading (3–4.4 V, 6 mg cm −2 ) can work for over 300 cycles at 0.5 C. Even with an ultra‐high loading of 16 mg cm −2 , LCO/SP‐PCPE/Li batteries achieve an excellent cycling performance. This work provides new insights into how to construct a robust interface for solid‐state batteries with high‐loading cathode.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, Sichuan, 611731, China.
- School of Precision Instruments and OptoElectronics Engineering, Tianjin University, Tianjin, 300072, China.
- School of Chemical Engineering, Sichuan University of Science & Engineering, Zigong, 643000, China.
- Yangtze Delta Region Institute (HuZhou), University of Electronic Science and Technology of China, Huzhou, Zhejiang, 313001, China.
ORCID-Profile: Mengqiang Wu
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Sichuan Province
- Chengdu Municipal Science and Technology Program
- Science and Technology Department of Sichuan Province
Zitieren
APA
Fang, Z., Zhang, M., Zhang, Z., Li, J., Peng, H., Wu, J., Zhou, H., Xu, Z., & Wu, M. (2024). In Situ Constructing Robust Interface by Deep Eutectic Polymeric Electrolyte Enables High Performance Lithium Metal Batteries with High‐Loading Cathode. Advanced Science, 11(47). https://doi.org/10.1002/advs.202411421
Vancouver
Fang Z, Zhang M, Zhang Z, Li J, Peng H, Wu J, et al. In Situ Constructing Robust Interface by Deep Eutectic Polymeric Electrolyte Enables High Performance Lithium Metal Batteries with High‐Loading Cathode. Advanced Science. 2024;11(47). doi:10.1002/advs.202411421
BibTeX
@article{Fang2024,
author = {Fang, Zixuan and Zhang, Ming and Zhang, Zhihao and Li, Jitao and Peng, Haofeng and Wu, Jintian and Zhou, Haiping and Xu, Ziqiang and Wu, Mengqiang},
title = {In Situ Constructing Robust Interface by Deep Eutectic Polymeric Electrolyte Enables High Performance Lithium Metal Batteries with High‐Loading Cathode},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {47},
doi = {10.1002/advs.202411421}
}
EUVIMED