Highly Thermally Conductive Liquid Crystalline Epoxy Resin Vitrimers with Reconfigurable, Shape‐Memory, Photo‐Thermal, and Closed‐Loop Recycling Performance
Advanced Science · 2025-01 · 12 (3)
DOI: 10.1002/advs.202410362 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 22.11.2024. Verfasst von Fengyuan Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Shaanxi Key Laboratory of Macromolecular Science and Technology, School of Chemistry and Chemical Engineering, Northwestern Polytechnical University,…. Die Arbeit wurde bisher 96-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Basic Research Program of Shaanxi, Innovation Capability Support Program of Shaanxi, Natural Science Foundation of Chongqing.
Abstract (Originalsprache)
The low thermal conductivity, poor toughness, and non‐reprocessability of thermosetting epoxy resins severely restrict their applications and sustainable development in flexible electronics. Herein, liquid crystalline epoxy (LCE) and dynamic ester and disulfide bonds are introduced into the cured network of bisphenol A epoxy resin (E‐51) to construct highly thermally conductive flexible liquid crystalline epoxy resin (LCER) vitrimers. LCER vitrimers demonstrate adjustable mechanical properties by varying the ratio of LCE to E‐51, allowing it to transition from soft to strong. Typically, a 75 mol% LCE to 25 mol% E‐51 ratio results in an in‐plane thermal conductivity ( λ ) of 1.27 W m −1 K −1 , over double that of pure E‐51 vitrimer (0.61 W m −1 K −1 ). The tensile strength and toughness increase 2.88 folds to 14.1 MPa and 2.45 folds to 20.1 MJ m −3 , respectively. Besides, liquid crystalline phase transition and dynamic covalent bonds enable triple shape memory and three‐dimensional shape reconstruction. After four reprocessing cycles, λ and tensile strength remain at 94% and 72%, respectively. Integrating carbon nanotubes (CNTs) imparts photo‐thermal effect and enables “on” and “off” switch under near‐infrared light to LCER vitrimer. Furthermore, the CNTs/LCER vitrimer displays light‐induced actuation, self‐repairing, and self‐welding besides the closed‐loop recycling and rapid degradation performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Shaanxi Key Laboratory of Macromolecular Science and Technology, School of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi, 710072, P. R. China.
ORCID-Profile: Junliang Zhang, Junwei Gu
Förderung
- Natural Science Basic Research Program of Shaanxi
- Innovation Capability Support Program of Shaanxi
- Natural Science Foundation of Chongqing
- Practice and Innovation Funds for Graduate Students of Northwestern Polytechnical University
- China Postdoctoral Science Foundation
- Key Research and Development Projects of Shaanxi Province
- National Natural Science Foundation of China
- Natural Science Foundation of Chongqing Municipality
Zitieren
APA
Zhang, F., Zhang, J., Zhang, K., Zhong, X., He, M., Qiu, H., & Gu, J. (2025). Highly Thermally Conductive Liquid Crystalline Epoxy Resin Vitrimers with Reconfigurable, Shape‐Memory, Photo‐Thermal, and Closed‐Loop Recycling Performance. Advanced Science, 12(3). https://doi.org/10.1002/advs.202410362
Vancouver
Zhang F, Zhang J, Zhang K, Zhong X, He M, Qiu H, et al. Highly Thermally Conductive Liquid Crystalline Epoxy Resin Vitrimers with Reconfigurable, Shape‐Memory, Photo‐Thermal, and Closed‐Loop Recycling Performance. Advanced Science. 2025;12(3). doi:10.1002/advs.202410362
BibTeX
@article{Zhang2025,
author = {Zhang, Fengyuan and Zhang, Junliang and Zhang, Kuan and Zhong, Xiao and He, Mukun and Qiu, Hua and Gu, Junwei},
title = {Highly Thermally Conductive Liquid Crystalline Epoxy Resin Vitrimers with Reconfigurable, Shape‐Memory, Photo‐Thermal, and Closed‐Loop Recycling Performance},
journal = {Advanced Science},
year = {2025},
volume = {12},
number = {3},
doi = {10.1002/advs.202410362}
}
EUVIMED