EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lightweight 3D Hierarchical Metamaterial Microlattices

Luke Mizzi iD, Krzysztof K Dudek iD, Andrea Frassineti, Andrea Spaggiari iD, Gwenn Ulliac, Muamer Kadic iD

Advanced Science · 2025-05 · 12 (20)

DOI: 10.1002/advs.202410293 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 02.05.2025. Verfasst von Luke Mizzi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Sciences and Methods for Engineering, University of Modena and Reggio Emilia, Reggio Emilia, 42121, Italy. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Narodowe Centrum Nauki, Fondazione Cariplo.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hierarchical auxetic metamaterials are a class of materials which are characterized by a multi‐tiered architecture and have the capability of exhibiting enhanced mechanical properties in comparison to their single‐geometry counterparts. In this work, three distinct new classes of hierarchical auxetic metamaterials designed by incorporating cubic crystal lattice geometries, namely, Body‐Centred Cubic (BCC), Face‐Centred Cubic (FCC) and Tetrahedral Cubic (TC) are proposed into 3D rotating cube structures. Through the introduction of hierarchy, these relatively dense mechanical metamaterials are rendered lightweight, through a volume fraction reduction of over 90% in the majority of cases from their full‐block (FB) counterparts, while retaining their original auxetic capabilities. These systems are also demonstrated to possess the ability to exhibit a wide range of stiffnesses and Poisson's ratios, including giant negative values, as well as superior stiffness/density ratios making them ideal for implementation in lightweight applications. Furthermore, a two‐photon lithography 3D‐printer is used to fabricate these new lattice structures at the microscale and test them in‐situ. The results obtained provide clear and comprehensive evidence of the improvement imparted through the introduction of hierarchy and the advantages of using this method to design lightweight 3D rotating unit auxetic structures.

Schlagwörter

Stichwörter der Autor:innen

auxetic metamaterialshierarchical systemslightweight structuresmicrolattice structurestwo‐photon lithography

Autor:innen und Institutionen

  • Department of Sciences and Methods for Engineering, University of Modena and Reggio Emilia, Reggio Emilia, 42121, Italy.
  • Institute of Physics, University of Zielona Gora, ul. Szafrana 4a, Zielona Gora, 65-069, Poland.
  • Institut FEMTO-ST, Université de Franche-Comté, CNRS, Besançon, 25030, France.

ORCID-Profile: Luke Mizzi, Krzysztof K Dudek, Andrea Spaggiari, Muamer Kadic

Förderung

  • Narodowe Centrum Nauki
  • Fondazione Cariplo

Zitieren

APA

Mizzi, L., Dudek, K. K., Frassineti, A., Spaggiari, A., Ulliac, G., & Kadic, M. (2025). Lightweight 3D Hierarchical Metamaterial Microlattices. Advanced Science, 12(20). https://doi.org/10.1002/advs.202410293

Vancouver

Mizzi L, Dudek KK, Frassineti A, Spaggiari A, Ulliac G, Kadic M. Lightweight 3D Hierarchical Metamaterial Microlattices. Advanced Science. 2025;12(20). doi:10.1002/advs.202410293

BibTeX
@article{Mizzi2025,
  author = {Mizzi, Luke and Dudek, Krzysztof K and Frassineti, Andrea and Spaggiari, Andrea and Ulliac, Gwenn and Kadic, Muamer},
  title = {Lightweight 3D Hierarchical Metamaterial Microlattices},
  journal = {Advanced Science},
  year = {2025},
  volume = {12},
  number = {20},
  doi = {10.1002/advs.202410293}
}
Kostenlos starten →