EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaporative Morphology Tuning of Conducting Polymer Films Under Controlled Vacuum Conditions

Seongju Kim, Byung Mook Weon iD, Dong Jin Kang iD, Sungjune Jung iD

Advanced Science · 2025-02 · 12 (6)

DOI: 10.1002/advs.202408790 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 23.12.2024. Verfasst von Seongju Kim und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), 77 Cheongam-Ro, Nam-gu, Pohang, 37673, Republ…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technology Innovation Program, Samsung Display Corporation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The evaporation of drops on solid surfaces is a ubiquitous natural phenomenon, and their dynamics play a pivotal role in many biological, environmental, and industrial processes. However, the complexity of the underlying mechanisms has largely confined previous studies to liquid drop evaporation under atmospheric conditions. In this study, the first comprehensive investigation of the evaporation dynamics of conducting polymer‐containing drops under controlled vacuum environments is presented. Utilizing high‐speed imaging of a drop within a vacuum chamber, it is observed that the evaporation of a sessile drop under vacuum conditions unfolds through four distinct stages: Constant Contact Radius (CCR), Constant Contact Angle (CCA), Increasing Contact Angle (ICA), and Stick and Slip (S&S) modes. The detailed analysis of the force balance reveals that the depinning dynamics of the contact line, significantly driven by vacuum‐induced forces, are the primary factor distinguishing these evaporation modes. A modified diffusion‐limited model specifically tailored for vacuum conditions is further developed, which closely aligns with the experimental data on volume reduction over time. Importantly, the study demonstrates that by carefully adjusting the vacuum level, it is possible to precisely manipulate the final film morphology, with uniform deposition achieved at an optimal pressure of 20 kPa. This research introduces a novel approach for controlling drop evaporation dynamics in vacuum, with potential applications in advanced manufacturing processes.

Schlagwörter

Stichwörter der Autor:innen

PEDOT:PSScoffee‐ring effectdiffusionevaporation modesessile drop

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), 77 Cheongam-Ro, Nam-gu, Pohang, 37673, Republic of Korea.
  • Soft Matter Physics Laboratory, School of Advanced Materials Science and Engineering, SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, Suwon, 16419, Republic of Korea.
  • Display Research Center, Samsung Display Co., Ltd, 1 Samsung-ro, Giheung-gu, Yongin-city, Gyeonggi-Do, 17113, Republic of Korea.

ORCID-Profile: Byung Mook Weon, Dong Jin Kang, Sungjune Jung

Förderung

  • Technology Innovation Program
  • Samsung Display Corporation

Zitieren

APA

Kim, S., Weon, B. M., Kang, D. J., & Jung, S. (2025). Evaporative Morphology Tuning of Conducting Polymer Films Under Controlled Vacuum Conditions. Advanced Science, 12(6). https://doi.org/10.1002/advs.202408790

Vancouver

Kim S, Weon BM, Kang DJ, Jung S. Evaporative Morphology Tuning of Conducting Polymer Films Under Controlled Vacuum Conditions. Advanced Science. 2025;12(6). doi:10.1002/advs.202408790

BibTeX
@article{Kim2025,
  author = {Kim, Seongju and Weon, Byung Mook and Kang, Dong Jin and Jung, Sungjune},
  title = {Evaporative Morphology Tuning of Conducting Polymer Films Under Controlled Vacuum Conditions},
  journal = {Advanced Science},
  year = {2025},
  volume = {12},
  number = {6},
  doi = {10.1002/advs.202408790}
}
Kostenlos starten →