High‐Strength, Thermally Stable, and Processable Wood Fiber/Polyamide Composites for Engineering Structural Components
Advanced Science · 2025-01 · 12 (1)
DOI: 10.1002/advs.202408708 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 11.11.2024. Verfasst von Zhengtong You und 11 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Bio-based Material Science & Technology (Ministry of Education), Northeast Forestry University, Harbin, 150040, P. R. China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Natural Science Foundation of Heilongjiang Province, Carbon Neutral Special Science Fund of Northeast Forestry University.
Abstract (Originalsprache)
Hybrid wood fiber/plastic composites offer a high‐value‐added utilization for agroforestry waste, which also providing a promising solution for reducing white pollution. However, the interface incompatibility between natural wood fibers and polymers significantly impairs the mechanical properties of the composites. Herein, a straightforward procedure is proposed to solve this problem, involving the removal of low‐thermal‐stability hemicellulose from wood fibers by hydrothermal pretreatment, followed by compositing with polyamide to produce hydrothermally treated wood fiber/polyamide composites (HWPACs). No chemical additives are required to improve the interface compatibility of composites, which simplifies the manufacturing process and provides environmental benefits. The effective removal of hemicellulose (78.35%) significantly increases the onset thermal degradation temperature of hydrothermally treated wood fibers (HWFs) by 27.49 °C. This prevents the generation of micro gaps during thermal processing, thereby improving the interfacial bonding strength between HWFs and polyamide. HWPACs exhibit higher mechanical strength (flexural strength 139.45 MPa) and thermal stability while maintaining a low density (1.22 g cm −3 ). Various lightweight, high‐strength, and multi‐shape materials can be prepared by hot pressing, injecting, and printing HWPACs, suggesting their suitability for applications in engineering structural components.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Bio-based Material Science & Technology (Ministry of Education), Northeast Forestry University, Harbin, 150040, P. R. China.
- School of Architecture and Civil engineering, Heilongjiang University of Science and Technology, Harbin, 150027, P. R. China.
- Country College of Materials and Energy, South China Agricultural University, Guangzhou, 510642, P. R. China.
ORCID-Profile: Wentao Gan
Förderung
- National Key Research and Development Program of China
- Natural Science Foundation of Heilongjiang Province
- Carbon Neutral Special Science Fund of Northeast Forestry University
Zitieren
APA
You, Z., Wang, H., Zhang, F., Zhang, H., Zou, C., Zhou, Z., Wang, Y., Xiao, Z., Liang, D., Wang, Q., Gan, W., & Xie, Y. (2025). High‐Strength, Thermally Stable, and Processable Wood Fiber/Polyamide Composites for Engineering Structural Components. Advanced Science, 12(1). https://doi.org/10.1002/advs.202408708
Vancouver
You Z, Wang H, Zhang F, Zhang H, Zou C, Zhou Z, et al. High‐Strength, Thermally Stable, and Processable Wood Fiber/Polyamide Composites for Engineering Structural Components. Advanced Science. 2025;12(1). doi:10.1002/advs.202408708
BibTeX
@article{You2025,
author = {You, Zhengtong and Wang, Haigang and Zhang, Feng and Zhang, Haoyuan and Zou, Chuwen and Zhou, Zhifang and Wang, Yonggui and Xiao, Zefang and Liang, Daxin and Wang, Qingwen and Gan, Wentao and Xie, Yanjun},
title = {High‐Strength, Thermally Stable, and Processable Wood Fiber/Polyamide Composites for Engineering Structural Components},
journal = {Advanced Science},
year = {2025},
volume = {12},
number = {1},
doi = {10.1002/advs.202408708}
}
EUVIMED