Direct‐Print 3D Electrodes for Large‐Scale, High‐Density, and Customizable Neural Interfaces
Advanced Science · 2025-01 · 12 (3)
DOI: 10.1002/advs.202408602 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 26.11.2024. Verfasst von Pingyu Wang und 13 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Stanford University, 350 Jane Stanford Way, Stanford, CA, 94305, USA. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Retinal Ganglion Cells. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NEI NIH HHS, European Union under the ERC advanced grant "neuroXscales", Wu Tsai Neurosciences Institute, Stanford University.
Abstract (Originalsprache)
Silicon‐based microelectronics can scalably record and modulate neural activity at high spatiotemporal resolution, but their planar form factor poses challenges in targeting 3D neural structures. A method for fabricating tissue‐penetrating 3D microelectrodes directly onto planar microelectronics using high‐resolution 3D printing via 2‐photon polymerization and scalable microfabrication technologies are presented. This approach enables customizable electrode shape, height, and positioning for precise targeting of neuron populations distributed in 3D. The effectiveness of this approach is demonstrated in tackling the critical challenge of interfacing with the retina—specifically, selectively targeting retinal ganglion cell (RGC) somas while avoiding the axon bundle layer. 6,600‐microelectrode, 35 µm pitch, tissue‐penetrating arrays are fabricated to obtain high‐fidelity, high‐resolution, and large‐scale retinal recording that reveals little axonal interference, a capability previously undemonstrated. Confocal microscopy further confirms the precise placement of the microelectrodes. This technology can be a versatile solution for interfacing silicon microelectronics with neural structures at a large scale and cellular resolution.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, Stanford University, 350 Jane Stanford Way, Stanford, CA, 94305, USA.
- Department of Electrical Engineering, Stanford University, Stanford University, 350 Jane Stanford Way, Stanford, CA, 94305, USA.
- Department of Biosystems Science and Engineering in Basel, ETH Zürich, Basel, Switzerland.
- Department of Chemical Engineering, Stanford University, 350 Jane Stanford Way, Stanford, CA, 94305, USA.
- Department of Neurosurgery, Stanford University, 350 Jane Stanford Way, Stanford, CA, 94305, USA.
- Department of Bioengineering, Stanford University, 350 Jane Stanford Way, Stanford, CA, 94305, USA.
ORCID-Profile: Pingyu Wang
Förderung
- NEI NIH HHS
- European Union under the ERC advanced grant "neuroXscales"
- Wu Tsai Neurosciences Institute, Stanford University
- National Eye Institute
Zitieren
APA
Wang, P., Wu, E. G., Uluşan, H., Zhao, E. T., Phillips, A. J., Kling, A., Hays, M. R., Vasireddy, P. K., Madugula, S., Vilkhu, R., Hierlemann, A., Hong, G., Chichilnisky, E. J., & Melosh, N. A. (2025). Direct‐Print 3D Electrodes for Large‐Scale, High‐Density, and Customizable Neural Interfaces. Advanced Science, 12(3). https://doi.org/10.1002/advs.202408602
Vancouver
Wang P, Wu EG, Uluşan H, Zhao ET, Phillips AJ, Kling A, et al. Direct‐Print 3D Electrodes for Large‐Scale, High‐Density, and Customizable Neural Interfaces. Advanced Science. 2025;12(3). doi:10.1002/advs.202408602
BibTeX
@article{Wang2025,
author = {Wang, Pingyu and Wu, Eric G and Uluşan, Hasan and Zhao, Eric Tianjiao and Phillips, A J and Kling, Alexandra and Hays, Madeline Rose and Vasireddy, Praful Krishna and Madugula, Sasidhar and Vilkhu, Ramandeep and Hierlemann, Andreas and Hong, Guosong and Chichilnisky, E J and Melosh, Nicholas A},
title = {Direct‐Print 3D Electrodes for Large‐Scale, High‐Density, and Customizable Neural Interfaces},
journal = {Advanced Science},
year = {2025},
volume = {12},
number = {3},
doi = {10.1002/advs.202408602}
}
EUVIMED