EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pristine MXene: In Situ XRD Study of MAX Phase Etching with HCl+LiF Solution

Bartosz Gurzęda, Nicolas Boulanger, Andreas Nordenström, Catherine Dejoie, Alexandr V Talyzin iD

Advanced Science · 2024-12 · 11 (48)

DOI: 10.1002/advs.202408448 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 30.10.2024. Verfasst von Bartosz Gurzęda und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Umeå University, Umeå, S-90187, Sweden. Die Arbeit wurde bisher 114-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Energimyndigheten, Kempestiftelserna, ESRF.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Many applications are suggested for Ti‐MXene motivating strong interest in studies of Ti 3 C 2 T x synthesis by solution‐based methods. However, so far only ex situ studies of the synthesis are performed, mostly due to the difficulty of handling HF‐based solutions. Here the first time‐resolved in situ synchrotron radiation X‐ray Diffraction study of MXene synthesis performed using a plastic capillary‐size reaction cell directly in HF solution is reported. This study provides the first report on the structure of “pristine MXene” formed by Ti 3 AlC 2 etching with LiF+HCl. The term “pristine” refers to the MXene structure found directly in HF solution. By comparing the interlayer distances of pristine MXene (≈13.5 Å), solvent‐free Li‐intercalated MXene (≈12.2 Å), and Li‐free MXene (≈10.7 Å), it can be concluded that the width of “slit pores” formed by terminated MX layers during the Al etching does not exceed ≈3 Å. The width of these slit pores is a key factor for HF etching of Al within the interlayers. This space constraint explains the slow kinetics of MXene formation in HF‐based synthesis methods. No intermediate phases are observed, suggesting that the crystalline MXene phase is formed by the simultaneous etching of Al and termination of Ti 3 C 2 layers.

Schlagwörter

Stichwörter der Autor:innen

2D materialsMXeneTi3C2TxX‐ray diffractionin situ synthesissynchrotron radiation

Autor:innen und Institutionen

  • Department of Physics, Umeå University, Umeå, S-90187, Sweden.
  • European Synchrotron Radiation Facility (ESRF), ID22 Beamline, 71 Avenue des Martyrs, Grenoble, 38000, France.

ORCID-Profile: Alexandr V Talyzin

Förderung

  • Energimyndigheten
  • Kempestiftelserna
  • ESRF
  • European Synchrotron Radiation Facility

Zitieren

APA

Gurzęda, B., Boulanger, N., Nordenström, A., Dejoie, C., & Talyzin, A. V. (2024). Pristine MXene: In Situ XRD Study of MAX Phase Etching with HCl+LiF Solution. Advanced Science, 11(48). https://doi.org/10.1002/advs.202408448

Vancouver

Gurzęda B, Boulanger N, Nordenström A, Dejoie C, Talyzin AV. Pristine MXene: In Situ XRD Study of MAX Phase Etching with HCl+LiF Solution. Advanced Science. 2024;11(48). doi:10.1002/advs.202408448

BibTeX
@article{Gurzda2024,
  author = {Gurzęda, Bartosz and Boulanger, Nicolas and Nordenström, Andreas and Dejoie, Catherine and Talyzin, Alexandr V},
  title = {Pristine MXene: In Situ XRD Study of MAX Phase Etching with HCl+LiF Solution},
  journal = {Advanced Science},
  year = {2024},
  volume = {11},
  number = {48},
  doi = {10.1002/advs.202408448}
}
Kostenlos starten →