High Thickness Tolerance in All‐Polymer‐Based Organic Photovoltaics Enables Efficient and Stable In‐Door Operation
Advanced Science · 2024-11 · 11 (42)
DOI: 10.1002/advs.202408181 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 20.09.2024. Verfasst von Lei Zhang und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics and Centre for Processable Electronics, Imperial College London, Prince Consort Road, London, SW7 2AZ, UK. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: LAMP Program of the National Research Foundation of Korea(NRF) grant funded by the Ministry of Education, EPSRC ATIP Programme, Welsh Government's Sêr Cymru II Program.
Abstract (Originalsprache)
Organic photovoltaics (OPVs) have great potential to drive low‐power consumption electronic devices under indoor light due to their highly tunable optoelectronic properties. Thick devices (>300 nm photo‐active junctions) are desirable to maximize photocurrent and to manufacture large‐scale modules via solution‐processing. However, thick devices usually suffer from severe charge recombination, deteriorating device performances. Herein, the study demonstrates excellent thickness tolerance of all‐polymer‐based PVs for efficient and stable indoor applications. Under indoor light, device performance is less dependent on photoactive layer thickness, exhibiting the best maximum power output in thick devices (34.7 µW cm −2 in 320–475 nm devices). Thick devices also exhibit much better photostability compared with thin devices. Such high thickness tolerance of all‐polymer‐based PV devices under indoor operation is attributed to strongly suppressed space‐charge effects, leading to reduced bimolecular recombination losses in thick devices. The unbalanced charge carrier mobilities are identified as the main cause for significant space‐charge effects, which is confirmed by drift‐diffusion simulations. This work suggests that all‐polymer‐based PVs, even with unbalanced mobilities, are highly desirable for thick, efficient, and stable devices for indoor applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Physics and Centre for Processable Electronics, Imperial College London, Prince Consort Road, London, SW7 2AZ, UK.
- Department of Chemistry and Research Institute of Molecular Alchemy (RIMA), Gyeongsang National University, Jinju, Gyeongnam, 660-701, South Korea.
- Department of Physics, Pukyong National University, Busan, 48513, Republic of Korea.
- Physics, Faculty of Science and Engineering, Åbo Akademi University, Henrikinkatu 2, Turku, 20500, Finland.
- Sustainable Advanced Materials (Sêr SAM) Group, Centre for Integrative Semiconductor Materials and Department of Physics, Swansea University, Singleton Park, Swansea, SA2 8PP, UK.
ORCID-Profile: Lei Zhang, Yun-Hi Kim, Ji-Seon Kim
Förderung
- LAMP Program of the National Research Foundation of Korea(NRF) grant funded by the Ministry of Education
- EPSRC ATIP Programme
- Welsh Government's Sêr Cymru II Program
- UKRI Research England RPIF Program
- Research Council of Finland
Zitieren
APA
Zhang, L., Lee, S., Park, S. Y., Sandberg, O. J., Yang, E. J., Meredith, P., Kim, Y. H., & Kim, J. S. (2024). High Thickness Tolerance in All‐Polymer‐Based Organic Photovoltaics Enables Efficient and Stable In‐Door Operation. Advanced Science, 11(42). https://doi.org/10.1002/advs.202408181
Vancouver
Zhang L, Lee S, Park SY, Sandberg OJ, Yang EJ, Meredith P, et al. High Thickness Tolerance in All‐Polymer‐Based Organic Photovoltaics Enables Efficient and Stable In‐Door Operation. Advanced Science. 2024;11(42). doi:10.1002/advs.202408181
BibTeX
@article{Zhang2024,
author = {Zhang, Lei and Lee, Seonjeong and Park, Song Yi and Sandberg, Oskar J and Yang, Emily J and Meredith, Paul and Kim, Yun-Hi and Kim, Ji-Seon},
title = {High Thickness Tolerance in All‐Polymer‐Based Organic Photovoltaics Enables Efficient and Stable In‐Door Operation},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {42},
doi = {10.1002/advs.202408181}
}
EUVIMED