EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Organic‐Inorganic Hybrid Solid Composite Electrolytes for High Energy Density Lithium Batteries: Combining Manufacturability, Conductivity, and Stability

Dries De Sloovere iD, Jonas Mercken iD, Jan D'Haen, Elien Derveaux iD, Peter Adriaensens iD, Philippe M Vereecken iD, Marlies K Van Bael iD, An Hardy iD

Advanced Science · 2024-12 · 11 (47)

DOI: 10.1002/advs.202406774 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 14.11.2024. Verfasst von Dries De Sloovere und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Materials Research (imo-Imomec), UHasselt and Imec, Agoralaan, Building D, Diepenbeek, 3590, Belgium. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Herculesstichting, Horizon 2020 Framework Programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The deployment of solid and quasi‐solid electrolytes in lithium metal batteries is envisioned to push their energy densities to even higher levels, in addition to providing enhanced safety. This article discusses a set of hybrid solid composite electrolytes which combine functional properties with electrode compatibility and manufacturability. Their anodic stability >5 V versus Li + /Li and compatibility with lithium metal stem from the incorporated ionic liquid electrolyte, whereas the organic‐inorganic hybrid host structure boosts their conductivity up to 2.7 mS cm −1 at room temperature. The absence of strong acids enables compatibility with porous NMC811 electrodes. Liquid precursor solutions can be readily impregnated into porous electrodes, facilitating cell assembly. Electrolytes containing TFSI − as the only anion have a superior compatibility toward high‐voltage positive electrode materials, whereas electrolytes containing both FSI − and TFSI − have a better compatibility toward lithium metal. Using the former as catholyte and the latter as anolyte, NMC811/Li coin cells retain up to 100% of their initial capacity after 100 cycles (0.2 C, 3.0–4.4 V vs Li + /Li). Because of their unprecedented combination of functional properties, electrode compatibility, and manufacturability, these hybrid solid composite electrolytes are potential candidates for the further development of lithium metal battery technology.

Schlagwörter

Stichwörter der Autor:innen

ionogellithium‐ion batteryorganosilanepotential

Autor:innen und Institutionen

  • Institute for Materials Research (imo-Imomec), UHasselt and Imec, Agoralaan, Building D, Diepenbeek, 3590, Belgium.
  • EnergyVille, Thor Park 8320, Genk, 3600, Belgium.
  • Imec, Energy Department, Kapeldreef 75, Leuven, 3001, Belgium.
  • KULeuven, M2S, cMACS, Celestijnenlaan 200F, Leuven, 3001, Belgium.

ORCID-Profile: Dries De Sloovere, Jonas Mercken, Elien Derveaux, Peter Adriaensens, Philippe M Vereecken, Marlies K Van Bael, An Hardy

Förderung

  • Herculesstichting
  • Horizon 2020 Framework Programme

Zitieren

APA

De Sloovere, D., Mercken, J., D'Haen, J., Derveaux, E., Adriaensens, P., Vereecken, P. M., Van Bael, M. K., & Hardy, A. (2024). Organic‐Inorganic Hybrid Solid Composite Electrolytes for High Energy Density Lithium Batteries: Combining Manufacturability, Conductivity, and Stability. Advanced Science, 11(47). https://doi.org/10.1002/advs.202406774

Vancouver

De Sloovere D, Mercken J, D'Haen J, Derveaux E, Adriaensens P, Vereecken PM, et al. Organic‐Inorganic Hybrid Solid Composite Electrolytes for High Energy Density Lithium Batteries: Combining Manufacturability, Conductivity, and Stability. Advanced Science. 2024;11(47). doi:10.1002/advs.202406774

BibTeX
@article{DeSloovere2024,
  author = {De Sloovere, Dries and Mercken, Jonas and D'Haen, Jan and Derveaux, Elien and Adriaensens, Peter and Vereecken, Philippe M and Van Bael, Marlies K and Hardy, An},
  title = {Organic‐Inorganic Hybrid Solid Composite Electrolytes for High Energy Density Lithium Batteries: Combining Manufacturability, Conductivity, and Stability},
  journal = {Advanced Science},
  year = {2024},
  volume = {11},
  number = {47},
  doi = {10.1002/advs.202406774}
}
Kostenlos starten →