EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Needle‐Plug/Piston‐Based Modular Mesoscopic Design Paradigm Coupled With Microfluidic Device for Point‐of‐Care Pooled Testing

Baobao Lin, Bao Li, Wu Zeng, Yulan Zhao, Huiping Li, Yin Gu, Peng Liu iD

Advanced Science · 2024

DOI: 10.1002/advs.202406076 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, 2024. Verfasst von Baobao Lin und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Tsinghua University, Beijing, 100084, China. Hauptthemen laut MEDLINE: COVID-19, Point-of-Care Testing, Equipment Design, Lab-On-A-Chip Devices. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Emerging diagnostic scenarios, such as population surveillance by pooled testing and on‐site rapid diagnosis, highlight the importance of advanced microfluidic systems for in vitro diagnostics. However, the widespread adoption of microfluidic technology faces challenges due to the lack of standardized design paradigms, posing difficulties in managing macro‐micro fluidic interfaces, reagent storage, and complex macrofluidic operations. This paper introduces a novel modular‐based mesoscopic design paradigm, featuring a core “needle‐plug/piston” structure with versatile variants for complex fluidic operations. These structures can be easily coupled with various microfluidic platforms to achieve truly self‐contained microsystems. Incorporated into a “3D extensible” design architecture, the mesoscopic design meets the demands of function integration, macrofluid manipulations, and flexible throughputs for point‐of‐care nucleic acid testing. Using this approach, an ultra‐sensitive nucleic acid detection system is developed with a limit of detection of ten copies of SARS‐CoV‐2 per mL. This system efficiently conducts large‐scale pooled testing from 50 pharyngeal swabs in a tube with an uncompromised sensitivity, enabling a truly “sample‐in‐answer‐out” microsystem with exceptional performance.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

COVID-19Point-of-Care TestingEquipment DesignLab-On-A-Chip DevicesHumansSARS-CoV-2Point-of-Care SystemsMicrofluidic Analytical TechniquesCOVID-19 Nucleic Acid Testing

Stichwörter der Autor:innen

microfluidicsmodular designpoint‐of‐care testing

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Tsinghua University, Beijing, 100084, China.
  • Changping Laboratory, Beijing, 102206, China.
  • State Key Laboratory of Space Medicine, China Astronaut Research and Training Center, Beijing, 100094, China.

ORCID-Profile: Peng Liu

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Lin, B., Li, B., Zeng, W., Zhao, Y., Li, H., Gu, Y., & Liu, P. (2024). Needle‐Plug/Piston‐Based Modular Mesoscopic Design Paradigm Coupled With Microfluidic Device for Point‐of‐Care Pooled Testing. Advanced Science. https://doi.org/10.1002/advs.202406076

Vancouver

Lin B, Li B, Zeng W, Zhao Y, Li H, Gu Y, et al. Needle‐Plug/Piston‐Based Modular Mesoscopic Design Paradigm Coupled With Microfluidic Device for Point‐of‐Care Pooled Testing. Advanced Science. 2024. doi:10.1002/advs.202406076

BibTeX
@article{Lin2024,
  author = {Lin, Baobao and Li, Bao and Zeng, Wu and Zhao, Yulan and Li, Huiping and Gu, Yin and Liu, Peng},
  title = {Needle‐Plug/Piston‐Based Modular Mesoscopic Design Paradigm Coupled With Microfluidic Device for Point‐of‐Care Pooled Testing},
  journal = {Advanced Science},
  year = {2024},
  doi = {10.1002/advs.202406076}
}
Kostenlos starten →