EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wet Chemistry Route to Li 3 InCl 6 : Microstructural Control Render High Ionic Conductivity and Enhanced All‐Solid‐State Battery Performance

Jacob Otabil Bonsu, Abhirup Bhadra, Dipan Kundu iD

Advanced Science · 2024-09 · 11 (34)

DOI: 10.1002/advs.202403208 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 08.07.2024. Verfasst von Jacob Otabil Bonsu und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering, UNSW Sydney, Kensington, NSW 2052, Australia. Die Arbeit wurde bisher 54-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of New South Wales.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thanks to superionic conductivity and compatibility with >4 V cathodes, halide solid electrolytes (SEs) have elicited tremendous interest for application in all‐solid‐state lithium batteries (ASSLBs). Many compositions based on groups 3, 13, and divalent metals, and substituted stoichiometries have been explored, some displaying requisite properties, but the Li + conductivity still falls short of theoretical predictions and appealing sulfide‐type SEs. While controlling microstructural characteristics, namely grain boundary effects and microstrain, can boost ionic conductivity, they have rarely been considered. Moving away from the standard solid‐state route, here a scalable and facile wet chemical approach for obtaining highly conductive (>2 mS cm −1 ) Li 3 InCl 6 is presented, and it is shown that aprotic solvents can reduce grain boundaries and microstrain, leading to very high ionic conductivity of over 4 mS cm −1 (at 22 °C). Minimized grain boundary area renders improved moisture stability and enhances solid–solid interfacial contact, leading to excellent LiNi 0.6 Mn 0.2 Co 0.2 O 2 ‐based full‐cell performance, exemplified by stable room temperature (22 °C) cycling at a 0.2 C rate with 155 mAh g −1 capacity and 85% retention after 1000 cycles at 60 °C with a high 99.75% Coulombic efficiency. The findings showcase the viability of the aprotic solvent‐mediated route for producing high‐quality Li 3 InCl 6 for all‐solid‐state batteries.

Schlagwörter

Stichwörter der Autor:innen

all‐solid‐state lithium batteryaprotic solvent‐mediated scalable synthesishalide solid electrolytehigh ionic conductivitymicrostructural characteristics

Autor:innen und Institutionen

  • School of Chemical Engineering, UNSW Sydney, Kensington, NSW 2052, Australia.
  • School of Mechanical and Manufacturing Engineering, UNSW Sydney, Kensington, NSW 2052, Australia.

ORCID-Profile: Dipan Kundu

Förderung

  • University of New South Wales

Zitieren

APA

Bonsu, J. O., Bhadra, A., & Kundu, D. (2024). Wet Chemistry Route to Li 3 InCl 6 : Microstructural Control Render High Ionic Conductivity and Enhanced All‐Solid‐State Battery Performance. Advanced Science, 11(34). https://doi.org/10.1002/advs.202403208

Vancouver

Bonsu JO, Bhadra A, Kundu D. Wet Chemistry Route to Li 3 InCl 6 : Microstructural Control Render High Ionic Conductivity and Enhanced All‐Solid‐State Battery Performance. Advanced Science. 2024;11(34). doi:10.1002/advs.202403208

BibTeX
@article{Bonsu2024,
  author = {Bonsu, Jacob Otabil and Bhadra, Abhirup and Kundu, Dipan},
  title = {Wet Chemistry Route to Li 3 InCl 6 : Microstructural Control Render High Ionic Conductivity and Enhanced All‐Solid‐State Battery Performance},
  journal = {Advanced Science},
  year = {2024},
  volume = {11},
  number = {34},
  doi = {10.1002/advs.202403208}
}
Kostenlos starten →