EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stable and Lead‐Safe Polyphenol‐Encapsulated Perovskite Solar Cells

Shahriyar Safat Dipta iD, Andrew J Christofferson iD, Priyank V Kumar, Varun Kundi iD, Muhammad Hanif, Jianbo Tang, Nieves Flores, Kourosh Kalantar-Zadeh iD, Ashraf Uddin iD, Md Arifur Rahim iD

Advanced Science · 2024-08 · 11 (31)

DOI: 10.1002/advs.202403057 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 18.06.2024. Verfasst von Shahriyar Safat Dipta und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, New South Wales, 2052, Australia. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council, Discovery Early Career Researcher Award, Discovery Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lead (Pb) halide perovskite solar cells (PSCs) exhibit impressive power conversion efficiencies close to those of their silicon counterparts. However, they suffer from moisture instability and Pb safety concerns. Previous studies have endeavoured to address these issues independently, yielding minimal advancements. Here, a general nanoencapsulation platform using natural polyphenols is reported for Pb‐halide PSCs that simultaneously addresses both challenges. The polyphenol‐based encapsulant is solution‐processable, inexpensive (≈1.6 USD m −2 ), and requires only 5 min for the entire process, highlighting its potential scalability. The encapsulated devices with a power conversion efficiency of 20.7% retained up to 80% of their peak performance for 2000 h and up to 70% for 7000 h. Under simulated rainfall conditions, the encapsulant rich in catechol groups captures the Pb ions released from the degraded perovskites via coordination, keeping the Pb levels within the safe drinking water threshold of 15 ppb.

Schlagwörter

Stichwörter der Autor:innen

Perovskite solar cellsencapsulationlead toxicitypolyphenol coatingstability

Autor:innen und Institutionen

  • School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, New South Wales, 2052, Australia.
  • School of Science, STEM College, RMIT University, Melbourne, Victoria, 2476, Australia.
  • School of Chemical Engineering, University of New South Wales (UNSW), Sydney, New South Wales, 2052, Australia.
  • School of Chemical and Biomolecular Engineering, University of Sydney, Sydney, New South Wales, 2006, Australia.
  • Department of Chemical and Biological Engineering, Monash University, Clayton, Victoria, 3800, Australia.

ORCID-Profile: Shahriyar Safat Dipta, Andrew J Christofferson, Varun Kundi, Kourosh Kalantar-Zadeh, Ashraf Uddin, Md Arifur Rahim

Förderung

  • Australian Research Council
  • Discovery Early Career Researcher Award
  • Discovery Project
  • National Computational Infrastructure

Zitieren

APA

Dipta, S. S., Christofferson, A. J., Kumar, P. V., Kundi, V., Hanif, M., Tang, J., Flores, N., Kalantar-Zadeh, K., Uddin, A., & Rahim, M. A. (2024). Stable and Lead‐Safe Polyphenol‐Encapsulated Perovskite Solar Cells. Advanced Science, 11(31). https://doi.org/10.1002/advs.202403057

Vancouver

Dipta SS, Christofferson AJ, Kumar PV, Kundi V, Hanif M, Tang J, et al. Stable and Lead‐Safe Polyphenol‐Encapsulated Perovskite Solar Cells. Advanced Science. 2024;11(31). doi:10.1002/advs.202403057

BibTeX
@article{Dipta2024,
  author = {Dipta, Shahriyar Safat and Christofferson, Andrew J and Kumar, Priyank V and Kundi, Varun and Hanif, Muhammad and Tang, Jianbo and Flores, Nieves and Kalantar-Zadeh, Kourosh and Uddin, Ashraf and Rahim, Md Arifur},
  title = {Stable and Lead‐Safe Polyphenol‐Encapsulated Perovskite Solar Cells},
  journal = {Advanced Science},
  year = {2024},
  volume = {11},
  number = {31},
  doi = {10.1002/advs.202403057}
}
Kostenlos starten →