Heat‐Dissipation Design and 3D Printing of Ternary Silver Chalcogenide‐Based Thermoelectric Legs for Enhancing Power Generation Performance
Advanced Science · 2024-08 · 11 (30)
DOI: 10.1002/advs.202402934 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 10.06.2024. Verfasst von Keonkuk Kim und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, The Ministry of Science and ICT.
Abstract (Originalsprache)
Thermoelectric devices have received significant attention because of their potential for sustainable energy recovery. In these devices, a thermal design that optimizes heat transfer and dissipation is crucial for maximizing the power output. Heat dissipation generally requires external active or passive cooling devices, which often suffer from inevitable heat loss and heavy systems. Herein, the design of heat‐sink integrated thermoelectric legs is proposed to enhance heat dissipation without external cooling devices, realized by finite element model simulation and 3D printing of ternary silver chalcogenide‐based thermoelectric materials. Owing to the self‐induced surface charges of the synthesized AgBiSe 2 (n‐type) and AgSbTe 2 (p‐type) particles, these particle‐based colloidal inks exhibited high viscoelasticity, which enables the creation of complex heat‐dissipation architectures via 3D printing. Power generators made from 3D‐printed heat‐dissipating legs exhibit higher temperature differences and output power than traditional cuboids, offering a new strategy for enhancing thermoelectric power generation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea.
- Department of Materials Science and Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan, 44919, Republic of Korea.
- Department of 3D Printing Materials, Korea Institute of Materials Science (KIMS), Changwon, 51508, Republic of Korea.
ORCID-Profile: Jae Sung Son
Förderung
- National Research Foundation of Korea
- The Ministry of Science and ICT
Zitieren
APA
Kim, K., Choo, S., Lee, J., Ju, H., Jung, S. H., Jo, S., Lee, S. H., Baek, S., Kim, J. Y., Kim, K. T., Chae, H. G., & Son, J. S. (2024). Heat‐Dissipation Design and 3D Printing of Ternary Silver Chalcogenide‐Based Thermoelectric Legs for Enhancing Power Generation Performance. Advanced Science, 11(30). https://doi.org/10.1002/advs.202402934
Vancouver
Kim K, Choo S, Lee J, Ju H, Jung SH, Jo S, et al. Heat‐Dissipation Design and 3D Printing of Ternary Silver Chalcogenide‐Based Thermoelectric Legs for Enhancing Power Generation Performance. Advanced Science. 2024;11(30). doi:10.1002/advs.202402934
BibTeX
@article{Kim2024,
author = {Kim, Keonkuk and Choo, Seungjun and Lee, Jungsoo and Ju, Hyejin and Jung, Soo-Ho and Jo, Seungki and Lee, So-Hyeon and Baek, Seongheon and Kim, Ju-Young and Kim, Kyung Tae and Chae, Han Gi and Son, Jae Sung},
title = {Heat‐Dissipation Design and 3D Printing of Ternary Silver Chalcogenide‐Based Thermoelectric Legs for Enhancing Power Generation Performance},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {30},
doi = {10.1002/advs.202402934}
}
EUVIMED