Improving the Rechargeable Li‐CO 2 Battery Performances by Tailoring Oxygen Defects on Li‐Ni‐Co‐Mn Multi‐Metal Oxide Catalysts Recycled from Spent Ternary Lithium‐Ion Batteries
Advanced Science · 2024-07 · 11 (28)
DOI: 10.1002/advs.202402892 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 17.05.2024. Verfasst von Juan Wang und 8 weiteren Autor:innen. Beteiligte Einrichtung: Kunming University of Science and Technology, Kunming, 650093, P. R. China. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of the Higher Education Institutions of Jiangsu Province, Gusu Leading Talent Program of Innovation and Entrepreneurship of Suzhou.
Abstract (Originalsprache)
Rechargeable Li‐CO 2 batteries are considered as a promising carbon‐neutral energy storage technology owing to their ultra‐high energy density and efficient CO 2 capture capability. However, the sluggish CO 2 reduction/evolution kinetics impedes their practical application, which leads to huge overpotentials and poor cyclability. Multi‐element transit metal oxides (TMOs) are demonstrated as effective cathodic catalysts for Li‐CO 2 batteries. But there are no reports on the integration of defect engineering on multi‐element TMOs. Herein, the oxygen vacancy‐bearing Li‐Ni‐Co‐Mn multi‐oxide (Re‐NCM‐H3) catalyst with the α ‐NaFeO 2 ‐type structure is first fabricated by annealing the NiCoMn precursor that derived from spent ternary LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode, in H 2 at 300 °C. As demonstrated by experimental results and theory calculations, the introduction of moderate oxygen vacancy has optimized electronic state near the Fermi level (E f ), eventually improving CO 2 adsorption and charge transfer. Therefore, the Li‐CO 2 batteries with Re‐NCM‐H3 catalyst deliver a high capacity (11808.9 mAh g −1 ), a lower overpotential (1.54 V), as well as excellent stability over 216 cycles at 100 mA g −1 and 165 cycles at 400 mA g −1 . This study not only opens up a sustainable application of spent ternary cathode, but also validates the potential of multi‐element TMO catalysts with oxygen defects for high‐efficiency Li‐CO 2 batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Kunming University of Science and Technology, Kunming, 650093, P. R. China.
- Suzhou Key Laboratory of Functional Ceramic Materials Department, Changshu Institute of Technology, Suzhou, 215500, P. R. China.
ORCID-Profile: Ningning Feng
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of the Higher Education Institutions of Jiangsu Province
- Gusu Leading Talent Program of Innovation and Entrepreneurship of Suzhou
Zitieren
APA
Wang, J., Feng, N., Zhang, S., Lin, Y., Zhang, Y., Du, J., Tian, S., Zhao, Q., & Yang, G. (2024). Improving the Rechargeable Li‐CO 2 Battery Performances by Tailoring Oxygen Defects on Li‐Ni‐Co‐Mn Multi‐Metal Oxide Catalysts Recycled from Spent Ternary Lithium‐Ion Batteries. Advanced Science, 11(28). https://doi.org/10.1002/advs.202402892
Vancouver
Wang J, Feng N, Zhang S, Lin Y, Zhang Y, Du J, et al. Improving the Rechargeable Li‐CO 2 Battery Performances by Tailoring Oxygen Defects on Li‐Ni‐Co‐Mn Multi‐Metal Oxide Catalysts Recycled from Spent Ternary Lithium‐Ion Batteries. Advanced Science. 2024;11(28). doi:10.1002/advs.202402892
BibTeX
@article{Wang2024,
author = {Wang, Juan and Feng, Ningning and Zhang, Shuang and Lin, Yang and Zhang, Yapeng and Du, Jing and Tian, Senlin and Zhao, Qun and Yang, Gang},
title = {Improving the Rechargeable Li‐CO 2 Battery Performances by Tailoring Oxygen Defects on Li‐Ni‐Co‐Mn Multi‐Metal Oxide Catalysts Recycled from Spent Ternary Lithium‐Ion Batteries},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {28},
doi = {10.1002/advs.202402892}
}
EUVIMED