Imperfection‐Enabled Strengthening of Ultra‐Lightweight Lattice Materials
Advanced Science · 2024-11 · 11 (41)
DOI: 10.1002/advs.202402727 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 16.09.2024. Verfasst von Junhao Ding und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Automation Engineering, Chinese University of Hong Kong, Sha Tin, Hong Kong, 999077, China. Die Arbeit wurde bisher 64-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University Grants Committee (Hong Kong) - Collaborative Research Fund, University Grants Committee (Hong Kong) - General Research Fund, Singapore Ministry of Education AcRF Tier 1 Grant.
Abstract (Originalsprache)
Lattice materials are an emerging family of advanced engineering materials with unique advantages for lightweight applications. However, the mechanical behaviors of lattice materials at ultra‐low relative densities are still not well understood, and this severely limits their lightweighting potential. Here, a high‐precision micro‐laser powder bed fusion technique is dveloped that enables the fabrication of metallic lattices with a relative density range much wider than existing studies. This technique allows to confirm that cubic lattices in compression undergo a yielding‐to‐buckling failure mode transition at low relative densities, and this transition fundamentally changes the usual strength ranking from plate > shell > truss at high relative densities to shell > plate > truss or shell > truss > plate at low relative densities. More importantly, it is shown that increasing bending energy ratio in the lattice through imperfections such as slightly‐corrugated geometries can significantly enhance the stability and strength of lattice materials at ultra‐low relative densities. This counterintuitive result suggests a new way for designing ultra‐lightweight lattice materials at ultra‐low relative densities.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical and Automation Engineering, Chinese University of Hong Kong, Sha Tin, Hong Kong, 999077, China.
- Faculty of Science, Agriculture, and Engineering, Newcastle University, Singapore, 567739, Singapore.
- Meta Robotics Institute, Shanghai Jiao Tong University, Shanghai, 200240, China.
- State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai, 200240, China.
- Department of Mechanical Engineering, National University of Singapore, Singapore, 117575, Singapore.
- School of Engineering, Great Bay University, Songshan Lake, Dongguan, Guangdong, 523808, China.
ORCID-Profile: Junhao Ding
Förderung
- University Grants Committee (Hong Kong) - Collaborative Research Fund
- University Grants Committee (Hong Kong) - General Research Fund
- Singapore Ministry of Education AcRF Tier 1 Grant
Zitieren
APA
Ding, J., Ma, Q., Li, X., Zhang, L., Yang, H., Qu, S., Wang, M. Y., Zhai, W., Gao, H., & Song, X. (2024). Imperfection‐Enabled Strengthening of Ultra‐Lightweight Lattice Materials. Advanced Science, 11(41). https://doi.org/10.1002/advs.202402727
Vancouver
Ding J, Ma Q, Li X, Zhang L, Yang H, Qu S, et al. Imperfection‐Enabled Strengthening of Ultra‐Lightweight Lattice Materials. Advanced Science. 2024;11(41). doi:10.1002/advs.202402727
BibTeX
@article{Ding2024,
author = {Ding, Junhao and Ma, Qingping and Li, Xinwei and Zhang, Lei and Yang, Hang and Qu, Shuo and Wang, Michael Yu and Zhai, Wei and Gao, Huajian and Song, Xu},
title = {Imperfection‐Enabled Strengthening of Ultra‐Lightweight Lattice Materials},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {41},
doi = {10.1002/advs.202402727}
}
EUVIMED