Data‐Driven Cycle Life Prediction of Lithium Metal‐Based Rechargeable Battery Based on Discharge/Charge Capacity and Relaxation Features
Advanced Science · 2024-09 · 11 (33)
DOI: 10.1002/advs.202402608 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 27.06.2024. Verfasst von Qianli Si und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Nanoscience and Nanoengineering, Faculty of Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku-ku, 169-8555, Japan. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SoftBank-NIMS Advanced Technologies Development Center, Program for Promoting Research on the Supercomputer Fugaku, Data Creation and Utilization Type Material Research and Development Project.
Abstract (Originalsprache)
Achieving precise estimates of battery cycle life is a formidable challenge due to the nonlinear nature of battery degradation. This study explores an approach using machine learning (ML) methods to predict the cycle life of lithium‐metal‐based rechargeable batteries with high mass loading LiNi 0.8 Mn 0.1 Co 0.1 O 2 electrode, which exhibits more complicated and electrochemical profile during battery operating conditions than typically studied LiFePO₄/graphite based rechargeable batteries. Extracting diverse features from discharge, charge, and relaxation processes, the intricacies of cell behavior without relying on specific degradation mechanisms are navigated. The best‐performing ML model, after feature selection, achieves an R 2 of 0.89, showcasing the application of ML in accurately forecasting cycle life. Feature importance analysis unveils the logarithm of the minimum value of discharge capacity difference between 100 and 10 cycle (Log(|min(Δ DQ 100–10 (V))|)) as the most important feature. Despite the inherent challenges, this model demonstrates a remarkable 6.6% test error on unseen data, underscoring its robustness and potential for transformative advancements in battery management systems. This study contributes to the successful application of ML in the realm of cycle life prediction for lithium‐metal‐based rechargeable batteries with practically high energy density design.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Nanoscience and Nanoengineering, Faculty of Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku-ku, 169-8555, Japan.
- Research Center for Energy and Environmental Materials (GREEN), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki, 305-0044, Japan.
- NIMS-SoftBank Advanced Technologies Development Center, National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki, 305-0044, Japan.
- Laboratory for Chemistry and Life Science, Institute of Innovative Research, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama, 226-8501, Japan.
ORCID-Profile: Shoichi Matsuda, Youhei Yamaji, Toshiyuki Momma, Yoshitaka Tateyama
Förderung
- SoftBank-NIMS Advanced Technologies Development Center
- Program for Promoting Research on the Supercomputer Fugaku
- Data Creation and Utilization Type Material Research and Development Project
Zitieren
APA
Si, Q., Matsuda, S., Yamaji, Y., Momma, T., & Tateyama, Y. (2024). Data‐Driven Cycle Life Prediction of Lithium Metal‐Based Rechargeable Battery Based on Discharge/Charge Capacity and Relaxation Features. Advanced Science, 11(33). https://doi.org/10.1002/advs.202402608
Vancouver
Si Q, Matsuda S, Yamaji Y, Momma T, Tateyama Y. Data‐Driven Cycle Life Prediction of Lithium Metal‐Based Rechargeable Battery Based on Discharge/Charge Capacity and Relaxation Features. Advanced Science. 2024;11(33). doi:10.1002/advs.202402608
BibTeX
@article{Si2024,
author = {Si, Qianli and Matsuda, Shoichi and Yamaji, Youhei and Momma, Toshiyuki and Tateyama, Yoshitaka},
title = {Data‐Driven Cycle Life Prediction of Lithium Metal‐Based Rechargeable Battery Based on Discharge/Charge Capacity and Relaxation Features},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {33},
doi = {10.1002/advs.202402608}
}
EUVIMED