Spike‐Based Neuromorphic Hardware for Dynamic Tactile Perception with a Self‐Powered Mechanoreceptor Array
Advanced Science · 2024-09 · 11 (34)
DOI: 10.1002/advs.202402175 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 09.07.2024. Verfasst von Sang-Won Lee und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of …. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea Electric Power Corporation, Hanbat National University in 2022.
Abstract (Originalsprache)
A self‐powered mechanoreceptor array is demonstrated using four mechanoreceptor cells for recognition of dynamic touch gestures. Each cell consists of a triboelectric nanogenerator (TENG) for touch sensing and a bi‐stable resistor (biristor) for spike encoding. It produces informative spike signals by sensing a force of an external touch and encoding the force into the number of spikes. An array of the mechanoreceptor cells is utilized to monitor various touch gestures and it successfully generated spike signals corresponding to all the gestures. To validate the practicality of the mechanoreceptor array, a spiking neural network (SNN), highly attractive for power consumption compared to the conventional von Neumann architecture, is used for the identification of touch gestures. The measured spiking signals are reflected as inputs for the SNN simulations. Consequently, touch gestures are classified with a high accuracy rate of 92.5%. The proposed mechanoreceptor array emerges as a promising candidate for a building block of tactile in‐sensor computing in the era of the Internet of Things (IoT), due to the low cost and high manufacturability of the TENG. This eliminates the need for a power supply, coupled with the intrinsic high throughput of the Si‐based biristor employing complementary metal–oxide–semiconductor (CMOS) technology.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea.
- System Semiconductor Engineering and Department of Electronic Engineering, Sogang University, 35 Baekbeom-ro, Mapo-gu, Seoul, 04107, Republic of Korea.
- Department of Neurosurgery, University of Pennsylvania, Philadelphia, PA, 19104, USA.
- Department of Electronic Engineering, Hanbat National University, 125 Dongseo-daero, Yuseong-gu, Daejeon, 34158, Republic of Korea.
ORCID-Profile: Yang-Kyu Choi
Förderung
- National Research Foundation of Korea
- Korea Electric Power Corporation
- Hanbat National University in 2022
- Regional Innovation Strategy
- Ministry of Education
- Korean government
- Hanbat National University
Zitieren
APA
Lee, S. W., Yun, S. Y., Han, J. K., Nho, Y. H., Jeon, S. B., & Choi, Y. K. (2024). Spike‐Based Neuromorphic Hardware for Dynamic Tactile Perception with a Self‐Powered Mechanoreceptor Array. Advanced Science, 11(34). https://doi.org/10.1002/advs.202402175
Vancouver
Lee SW, Yun SY, Han JK, Nho YH, Jeon SB, Choi YK. Spike‐Based Neuromorphic Hardware for Dynamic Tactile Perception with a Self‐Powered Mechanoreceptor Array. Advanced Science. 2024;11(34). doi:10.1002/advs.202402175
BibTeX
@article{Lee2024,
author = {Lee, Sang-Won and Yun, Seong-Yun and Han, Joon-Kyu and Nho, Young-Hoon and Jeon, Seung-Bae and Choi, Yang-Kyu},
title = {Spike‐Based Neuromorphic Hardware for Dynamic Tactile Perception with a Self‐Powered Mechanoreceptor Array},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {34},
doi = {10.1002/advs.202402175}
}
EUVIMED